燕山大学学报
燕山大學學報
연산대학학보
JOURNAL OF YANSHAN UNIVERSITY
2012年
4期
324-327
,共4页
郑丽娟%刘会莹%付宇明%韩晓娟
鄭麗娟%劉會瑩%付宇明%韓曉娟
정려연%류회형%부우명%한효연
Cr3C2颗粒%自保护药芯焊丝%堆焊合金%组织分析
Cr3C2顆粒%自保護藥芯銲絲%堆銲閤金%組織分析
Cr3C2과립%자보호약심한사%퇴한합금%조직분석
对加入Cr3C2的药芯焊丝制备的Cr3C2增强型堆焊合金组织和性能进行了分析.添加Cr3C2的自保护药芯焊丝堆焊工艺性能良好,堆焊表面少飞溅,无裂纹气孔.通过对比实验研究发现,加入Cr3C2的药芯焊丝制备的Cr3C2增强型堆焊合金组织细小,高温冲击韧性明显优于WC颗粒增强型药芯焊丝,合金组织中既有颗粒增强型药芯焊丝堆焊产生的颗粒增强相,又有高铬铸铁型药芯焊丝堆焊产生的高硬度初生碳化物,双重强化机制使堆焊层显微硬度达到含Nb高铬铸铁堆焊层的水平,平均硬度60 HRC以上.
對加入Cr3C2的藥芯銲絲製備的Cr3C2增彊型堆銲閤金組織和性能進行瞭分析.添加Cr3C2的自保護藥芯銲絲堆銲工藝性能良好,堆銲錶麵少飛濺,無裂紋氣孔.通過對比實驗研究髮現,加入Cr3C2的藥芯銲絲製備的Cr3C2增彊型堆銲閤金組織細小,高溫遲擊韌性明顯優于WC顆粒增彊型藥芯銲絲,閤金組織中既有顆粒增彊型藥芯銲絲堆銲產生的顆粒增彊相,又有高鉻鑄鐵型藥芯銲絲堆銲產生的高硬度初生碳化物,雙重彊化機製使堆銲層顯微硬度達到含Nb高鉻鑄鐵堆銲層的水平,平均硬度60 HRC以上.
대가입Cr3C2적약심한사제비적Cr3C2증강형퇴한합금조직화성능진행료분석.첨가Cr3C2적자보호약심한사퇴한공예성능량호,퇴한표면소비천,무렬문기공.통과대비실험연구발현,가입Cr3C2적약심한사제비적Cr3C2증강형퇴한합금조직세소,고온충격인성명현우우WC과립증강형약심한사,합금조직중기유과립증강형약심한사퇴한산생적과립증강상,우유고락주철형약심한사퇴한산생적고경도초생탄화물,쌍중강화궤제사퇴한층현미경도체도함Nb고락주철퇴한층적수평,평균경도60 HRC이상.