稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2010年
3期
397-400
,共4页
赖忠民%薛松柏%韩宪鹏%顾立勇%顾文华
賴忠民%薛鬆柏%韓憲鵬%顧立勇%顧文華
뢰충민%설송백%한헌붕%고립용%고문화
焊接接头%银钎料%显微组织%力学性能
銲接接頭%銀釬料%顯微組織%力學性能
한접접두%은천료%현미조직%역학성능
brazed joint%silver based brazing alloy%microstructure%mechanical property
研究了不同合金元素Ga,Sn,In和Ni添加对Cd银基钎料及其钎焊接头的显微组织影响,同时对AgCuZn-X(Ga,Sn,In,Ni)钎料的对接和搭接实验做了对比实验分析.结果表明,添加Ga,Sn,In和Ni 4种元素的银钎料具有"特有的镓结构",具有较低的固相线和液相线,其钎缝力学性能优异,由SEM观察钎缝显微组织可知,低银含镓钎料具有与高银高镓钎料相近的织网状致密组织,添加适当的元素可以显著提高低银钎料的性能.
研究瞭不同閤金元素Ga,Sn,In和Ni添加對Cd銀基釬料及其釬銲接頭的顯微組織影響,同時對AgCuZn-X(Ga,Sn,In,Ni)釬料的對接和搭接實驗做瞭對比實驗分析.結果錶明,添加Ga,Sn,In和Ni 4種元素的銀釬料具有"特有的鎵結構",具有較低的固相線和液相線,其釬縫力學性能優異,由SEM觀察釬縫顯微組織可知,低銀含鎵釬料具有與高銀高鎵釬料相近的織網狀緻密組織,添加適噹的元素可以顯著提高低銀釬料的性能.
연구료불동합금원소Ga,Sn,In화Ni첨가대Cd은기천료급기천한접두적현미조직영향,동시대AgCuZn-X(Ga,Sn,In,Ni)천료적대접화탑접실험주료대비실험분석.결과표명,첨가Ga,Sn,In화Ni 4충원소적은천료구유"특유적가결구",구유교저적고상선화액상선,기천봉역학성능우이,유SEM관찰천봉현미조직가지,저은함가천료구유여고은고가천료상근적직망상치밀조직,첨가괄당적원소가이현저제고저은천료적성능.
Ga, Sn, In and Ni were added into AgCuZn cadmium-flee brazing alloys. The influences of Ga, Sn, In and Ni on the microstructures and properties of AgCuZn brazing alloys were investigated. Mechanical properties of the butt and lap brazed joints were also tested. Results indicate that all AgCuZn-X(Ga, Sn, In, Ni) brazing alloys have low solidus and liquidus and acceptable mechanical properties. It is pointed out that the mechanical properties of the brazed joints are satisfactory due to the formation of fine network "characteristic gallium structure" when Ag and G-a contents are in a range of 30 wt%-56 wt% and 1 wt%-3 wt%, respectively, in the AgCuZn brazing alloy.