中国实用眼科杂志
中國實用眼科雜誌
중국실용안과잡지
CHINESE JOURNAL OF PRACTICAL OPHTHALMOLOGY
2008年
12期
1354-1357
,共4页
牟章兵%李旭松%朱晋%陈林%谢艾芮%莫静
牟章兵%李旭鬆%硃晉%陳林%謝艾芮%莫靜
모장병%리욱송%주진%진림%사애예%막정
混合性散光%准分子激光原位角膜磨镶术%设计模式%手术参数
混閤性散光%準分子激光原位角膜磨鑲術%設計模式%手術參數
혼합성산광%준분자격광원위각막마양술%설계모식%수술삼수
Mixed astigmatism%Laser in situ keratomileusis%Design pattem%Operation parameter
目的 初步探讨LASIK手术矫正混合性散光四种设计模式的转换公式和手术参数对比情况,以便加深对混合性散光设计模式的理解和掌握.方法 随机选取行LASIK手术的混合性散光病例10例(13只眼),寻找四种设计模式之间的转换公式,并对四种设计模式的理论切削厚度、剩余基质床厚度和激光脉冲数分别进行配对t检验.结果 转换公式:如果负柱镜法用(a)DS/(b)DCx(c)表示,则正柱镜法可表示为(a+b)DS/(-b)DC×(90+c)或(c-90),两光区交叉柱镜法可表示为(a+b)DC×(c),(a)DC×(90+c)或(c-90),三光区交叉柱镜法可表示为(b/2)DC×(c),(-b/2)DC×(90+c)或(c-90),(a+b/2)DS.就手术参数而言,两光区交叉柱镜法在理论切削厚度、激光脉冲数和剩余基质床厚度方面都具有绝对优势,三光区交叉柱镜法和负柱镜法居中,二者差异无统计学意义,而正柱镜法则最消耗角膜组织和激光切削时间最长.结论 混合性散光的四种设计模式可以运用简单的公式进行转换,各种设计模式消耗的角膜组织都不多,如何让切削面更平坦光滑和提高术后视觉质量显得更为重要.
目的 初步探討LASIK手術矯正混閤性散光四種設計模式的轉換公式和手術參數對比情況,以便加深對混閤性散光設計模式的理解和掌握.方法 隨機選取行LASIK手術的混閤性散光病例10例(13隻眼),尋找四種設計模式之間的轉換公式,併對四種設計模式的理論切削厚度、剩餘基質床厚度和激光脈遲數分彆進行配對t檢驗.結果 轉換公式:如果負柱鏡法用(a)DS/(b)DCx(c)錶示,則正柱鏡法可錶示為(a+b)DS/(-b)DC×(90+c)或(c-90),兩光區交扠柱鏡法可錶示為(a+b)DC×(c),(a)DC×(90+c)或(c-90),三光區交扠柱鏡法可錶示為(b/2)DC×(c),(-b/2)DC×(90+c)或(c-90),(a+b/2)DS.就手術參數而言,兩光區交扠柱鏡法在理論切削厚度、激光脈遲數和剩餘基質床厚度方麵都具有絕對優勢,三光區交扠柱鏡法和負柱鏡法居中,二者差異無統計學意義,而正柱鏡法則最消耗角膜組織和激光切削時間最長.結論 混閤性散光的四種設計模式可以運用簡單的公式進行轉換,各種設計模式消耗的角膜組織都不多,如何讓切削麵更平坦光滑和提高術後視覺質量顯得更為重要.
목적 초보탐토LASIK수술교정혼합성산광사충설계모식적전환공식화수술삼수대비정황,이편가심대혼합성산광설계모식적리해화장악.방법 수궤선취행LASIK수술적혼합성산광병례10례(13지안),심조사충설계모식지간적전환공식,병대사충설계모식적이론절삭후도、잉여기질상후도화격광맥충수분별진행배대t검험.결과 전환공식:여과부주경법용(a)DS/(b)DCx(c)표시,칙정주경법가표시위(a+b)DS/(-b)DC×(90+c)혹(c-90),량광구교차주경법가표시위(a+b)DC×(c),(a)DC×(90+c)혹(c-90),삼광구교차주경법가표시위(b/2)DC×(c),(-b/2)DC×(90+c)혹(c-90),(a+b/2)DS.취수술삼수이언,량광구교차주경법재이론절삭후도、격광맥충수화잉여기질상후도방면도구유절대우세,삼광구교차주경법화부주경법거중,이자차이무통계학의의,이정주경법칙최소모각막조직화격광절삭시간최장.결론 혼합성산광적사충설계모식가이운용간단적공식진행전환,각충설계모식소모적각막조직도불다,여하양절삭면경평탄광활화제고술후시각질량현득경위중요.
Objective To discuss the transformation formulae and operation parameters of laser in situ kemtomileusis (LASIK)with four design patterns to correct mixed astigmatism in order to understand and master the design patterns of mixed astigmatism better.Methods This study included 13 eyes of 10 patients with mixed astigmatism treated by LASIK.We studied the transformation formulae and compared the ablation depth,residual stromal thickness,laser pulses of four design patterns.Results If the negative cylinder expressed by (a)DS/(b)DC×(c), then the positive cylinder could express by (a+b)DS/(-b )DC×(90+c)or (c-90),the two-zone-cross-cylinder by (a+b)DC×(c)/ (a)DC×(90+c)or (c-90),the three-zone-cross-cylinder by (b/2)DC×(c)/ (-b/2)DC×(90+c)or (c-90)/ (a+b/2)DS.For the operation parameters,the two-zone-cross- cylinder had absolute advantage at the ablation depth,residual stromal thickness and laser pulses.The three-zone-cross-cylinder and negative cylinder were placed in the middle, and there had no statistical difference between them.The most corneal tissue was ablated in positive cylinder pattem.Cunclusion The four design patterns of mixed astigmatism could transform by simple formulae.A little corneal tissue was ablated to correct mixed astigmatism with each design pattern,and it was more important how to smoothen the interface and improve the vision quality.