武汉理工大学学报
武漢理工大學學報
무한리공대학학보
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY
2008年
2期
21-24
,共4页
武七德%郑彩华%吉晓莉%王友兵
武七德%鄭綵華%吉曉莉%王友兵
무칠덕%정채화%길효리%왕우병
消泡%表面张力%流变特性%SiC料浆
消泡%錶麵張力%流變特性%SiC料漿
소포%표면장력%류변특성%SiC료장
研究了3种不同类型的消泡剂对一种有机包覆改性SiC料浆的稳定性和流变特性的影响 ,及消泡剂的表面张力与其消泡效果和坯体密度之间的关系.结果表明:3种消泡剂对料浆稳定性的影响都不大,随着非/阴离子复配消泡剂用量的增加,料浆由涨流型流体逐渐转变为假塑型流体,当其加入量为质量分数的0.1%时,料浆在低剪切速率(<80 s-1) 下的粘度最低,注浆成型坯体密度最高.当有机硅消泡剂的表面张力最低时,消泡效果最好 ,但注浆成型坯体密度却不高.
研究瞭3種不同類型的消泡劑對一種有機包覆改性SiC料漿的穩定性和流變特性的影響 ,及消泡劑的錶麵張力與其消泡效果和坯體密度之間的關繫.結果錶明:3種消泡劑對料漿穩定性的影響都不大,隨著非/陰離子複配消泡劑用量的增加,料漿由漲流型流體逐漸轉變為假塑型流體,噹其加入量為質量分數的0.1%時,料漿在低剪切速率(<80 s-1) 下的粘度最低,註漿成型坯體密度最高.噹有機硅消泡劑的錶麵張力最低時,消泡效果最好 ,但註漿成型坯體密度卻不高.
연구료3충불동류형적소포제대일충유궤포복개성SiC료장적은정성화류변특성적영향 ,급소포제적표면장력여기소포효과화배체밀도지간적관계.결과표명:3충소포제대료장은정성적영향도불대,수착비/음리자복배소포제용량적증가,료장유창류형류체축점전변위가소형류체,당기가입량위질량분수적0.1%시,료장재저전절속솔(<80 s-1) 하적점도최저,주장성형배체밀도최고.당유궤규소포제적표면장력최저시,소포효과최호 ,단주장성형배체밀도각불고.