润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2013年
7期
46-50
,共5页
刘婷婷%朱永伟%刘蕴锋%张尚文
劉婷婷%硃永偉%劉蘊鋒%張尚文
류정정%주영위%류온봉%장상문
复合镀层%自润滑性%显微硬度%耐磨性
複閤鍍層%自潤滑性%顯微硬度%耐磨性
복합도층%자윤활성%현미경도%내마성
composite coatings%self-lubricity%microhardness%wear resistance
通过化学沉积法在MoS 2颗粒表面形成一层氧化铝,采用化学复合镀覆的方法制备Ni-P-MoS 2/Al2 O3复合镀层。研究复合镀液中MoS 2颗粒含量和搅拌速度对复合镀层显微硬度及摩擦磨损特性的影响,比较由MoS 2改性方式和添加分散剂方式获得镀层的性能,分析复合镀层的横截面及表面形貌。结果表明:随着MoS 2颗粒含量和搅拌速度增加,镀层显微硬度、摩擦因数、耐磨性均先减小后增大。与添加分散剂制备的Ni-P-MoS 2复合镀层相比,改性颗粒获得的Ni-P-MoS2复合镀层的自润滑性、显微硬度、耐磨性均有所提高。
通過化學沉積法在MoS 2顆粒錶麵形成一層氧化鋁,採用化學複閤鍍覆的方法製備Ni-P-MoS 2/Al2 O3複閤鍍層。研究複閤鍍液中MoS 2顆粒含量和攪拌速度對複閤鍍層顯微硬度及摩抆磨損特性的影響,比較由MoS 2改性方式和添加分散劑方式穫得鍍層的性能,分析複閤鍍層的橫截麵及錶麵形貌。結果錶明:隨著MoS 2顆粒含量和攪拌速度增加,鍍層顯微硬度、摩抆因數、耐磨性均先減小後增大。與添加分散劑製備的Ni-P-MoS 2複閤鍍層相比,改性顆粒穫得的Ni-P-MoS2複閤鍍層的自潤滑性、顯微硬度、耐磨性均有所提高。
통과화학침적법재MoS 2과립표면형성일층양화려,채용화학복합도복적방법제비Ni-P-MoS 2/Al2 O3복합도층。연구복합도액중MoS 2과립함량화교반속도대복합도층현미경도급마찰마손특성적영향,비교유MoS 2개성방식화첨가분산제방식획득도층적성능,분석복합도층적횡절면급표면형모。결과표명:수착MoS 2과립함량화교반속도증가,도층현미경도、마찰인수、내마성균선감소후증대。여첨가분산제제비적Ni-P-MoS 2복합도층상비,개성과립획득적Ni-P-MoS2복합도층적자윤활성、현미경도、내마성균유소제고。
MoS2 particles were coated with Al2 O3 layer by chemical deposition and Ni-P-MoS2/Al2 O3 composite coatings were prepared by electroless composite plating. The influence of MoS2 particles contents in the composite bath and agitation speed on microhardness,friction and wear properties of composite coatings was studied. The performance of coatings prepared by coated-MoS2 or by adding dispersing agent was compared. The cross section and surface morphology of composite coatings was analyzed. The results show that with the increase of MoS2 particles contents and agitation speed, microhardness,friction and wear properties are decreased first and increased then. Self-lubricity,microhardness and wear resistance of Ni-P-MoS2 composite coatings prepared by coated-MoS2 are improved compared with adding dispersing agent ones.