武夷学院学报
武夷學院學報
무이학원학보
JOURNAL OF WUYI UNIVERSITY
2014年
2期
70-74
,共5页
林铮%姚立纲%姚琢%林权
林錚%姚立綱%姚琢%林權
림쟁%요립강%요탁%림권
齿面接触%渐开线%螺旋锥齿轮%章动传动
齒麵接觸%漸開線%螺鏇錐齒輪%章動傳動
치면접촉%점개선%라선추치륜%장동전동
tooth contact%involute%spiral bevel gear%nutation drive
对章动传动中内啮合渐开线螺旋锥齿轮的齿面接触特性进行分析。根据章动内啮合螺旋锥齿轮啮合原理,在建立由渐开线曲线和齿根过渡曲线组成的法向基本齿廓方程基础上,推导内啮合渐开线螺旋锥齿轮齿面方程,并建立其三维模型。在有限元软件中建立渐开线螺旋锥齿轮齿面接触分析的有限元模型,从接触面积、接触压强、接触力及Mises 应力等方面对齿面接触特性进行分析,分析结果有助于章动内啮合螺旋锥齿轮的改进设计。
對章動傳動中內齧閤漸開線螺鏇錐齒輪的齒麵接觸特性進行分析。根據章動內齧閤螺鏇錐齒輪齧閤原理,在建立由漸開線麯線和齒根過渡麯線組成的法嚮基本齒廓方程基礎上,推導內齧閤漸開線螺鏇錐齒輪齒麵方程,併建立其三維模型。在有限元軟件中建立漸開線螺鏇錐齒輪齒麵接觸分析的有限元模型,從接觸麵積、接觸壓彊、接觸力及Mises 應力等方麵對齒麵接觸特性進行分析,分析結果有助于章動內齧閤螺鏇錐齒輪的改進設計。
대장동전동중내교합점개선라선추치륜적치면접촉특성진행분석。근거장동내교합라선추치륜교합원리,재건립유점개선곡선화치근과도곡선조성적법향기본치곽방정기출상,추도내교합점개선라선추치륜치면방정,병건립기삼유모형。재유한원연건중건립점개선라선추치륜치면접촉분석적유한원모형,종접촉면적、접촉압강、접촉력급Mises 응력등방면대치면접촉특성진행분석,분석결과유조우장동내교합라선추치륜적개진설계。
The tooth surface contact characteristic of internal meshing involute spiral bevel gears for nutation drive is considered. The basic tooth profile of involute is composed of involute curve and dedendum transition curve, and the equations are established. Based on the meshing principle of internal meshing spiral bevel gears for nutation drive, the mathematical models of the involute spiral bevel gears are developed, and the three dimensional modeling of the internal meshing involute spiral bevel gear is illustrated. The finite element model of tooth surface contact characteristic with involute spiral bevel gears is established. The tooth surface contact characteristic analysis of internal meshing involute spiral bevel gears are carried out through the contact areas, contact pressure, contact forces and mises stress. The analysis results are helpful to the improvement of the design of internal meshing spiral bevel gears for nutation drive.