湿法冶金
濕法冶金
습법야금
HYDROMETALLURGY OF CHINA
2013年
4期
266-269
,共4页
米秋秋%李军旗%金会心%毛小浩
米鞦鞦%李軍旂%金會心%毛小浩
미추추%리군기%금회심%모소호
有机物%铝酸钠溶液%结晶法%脱除
有機物%鋁痠鈉溶液%結晶法%脫除
유궤물%려산납용액%결정법%탈제
organics%sodium aluminate solution%crystallization process%removal
拜耳法生产氧化铝过程中,铝酸钠溶液中的有机物对生产有负面影响。研究了采用结晶法脱除某铝厂分解母液中的有机物,考察了母液苛性碱质量浓度、时间、晶种量、温度对脱除有机物的影响,分析了浓缩渣的物相组成和显微形貌。结果表明:用结晶法可脱除部分有机物;较佳的结晶条件为苛性碱质量浓度360 g/L ,结晶温度60℃,晶种添加量40 g/L ,结晶时间12 h。最佳条件下,草酸钠脱除率为28.40%,总有机碳脱除率为25.74%;浓缩渣产物的结晶形态以附聚物为主,含不同组成和结构的有机物,主要为酯类、酸类、酮类等。
拜耳法生產氧化鋁過程中,鋁痠鈉溶液中的有機物對生產有負麵影響。研究瞭採用結晶法脫除某鋁廠分解母液中的有機物,攷察瞭母液苛性堿質量濃度、時間、晶種量、溫度對脫除有機物的影響,分析瞭濃縮渣的物相組成和顯微形貌。結果錶明:用結晶法可脫除部分有機物;較佳的結晶條件為苛性堿質量濃度360 g/L ,結晶溫度60℃,晶種添加量40 g/L ,結晶時間12 h。最佳條件下,草痠鈉脫除率為28.40%,總有機碳脫除率為25.74%;濃縮渣產物的結晶形態以附聚物為主,含不同組成和結構的有機物,主要為酯類、痠類、酮類等。
배이법생산양화려과정중,려산납용액중적유궤물대생산유부면영향。연구료채용결정법탈제모려엄분해모액중적유궤물,고찰료모액가성감질량농도、시간、정충량、온도대탈제유궤물적영향,분석료농축사적물상조성화현미형모。결과표명:용결정법가탈제부분유궤물;교가적결정조건위가성감질량농도360 g/L ,결정온도60℃,정충첨가량40 g/L ,결정시간12 h。최가조건하,초산납탈제솔위28.40%,총유궤탄탈제솔위25.74%;농축사산물적결정형태이부취물위주,함불동조성화결구적유궤물,주요위지류、산류、동류등。
In Byer process ,the organics in sodium aluminate solution may cause a series of negative effects .By crystallization process ,the effects of alkali concentration ,crystallization time ,the amount of seeds and crystallization temperature on the removal of organics from Bayer liquor has been investigated ,and the phase composition of concentrated residue was analyzed .The experiment results showed that at the crystallization conditions of alkali concentration of 360 g/L ,temperature of 60 ℃ , the seeds amount of 40 g/L and crystallization time of 12 h ,the removal rate of sodium oxalate was 27 .40% ,and the removal rate of total organic carbon was 25 .74% .Crystal morphology of concentrated residue was agglomerates and the concentrated residue were composed of organics ,such as esters ,acids ,ketones ,etc .with different composition and structure .