CAJ | 학술논문

　　为了准直并整形具有像散的激光二极管光束，采用高斯光束q参量变换规律，推导了利用柱面自聚焦透镜整形激光二极管光束应满足的条件，并在此基础上，通过软件模拟优化，得到了一套效果良好的光束整形准直系统。经过准直整形后光束快慢轴方向发散角基本相等，均小于0.7mrad，束腰位置差异小于2.8mm。结果表明，系统中柱面自聚焦透镜的应用起到了较好的效果，准直整形后的光束具有发散角较小且旋转对称等特点。
　　위료준직병정형구유상산적격광이겁관광속，채용고사광속q삼량변환규률，추도료이용주면자취초투경정형격광이겁관광속응만족적조건，병재차기출상，통과연건모의우화，득도료일투효과량호적광속정형준직계통。경과준직정형후광속쾌만축방향발산각기본상등，균소우0.7mrad，속요위치차이소우2.8mm。결과표명，계통중주면자취초투경적응용기도료교호적효과，준직정형후적광속구유발산각교소차선전대칭등특점。
In order to collimate and shape the LD beam with astigmatism , the mathematic condition for LD beam shaping with a cylindrical gradient-index lens was introduced applying ABCD law.Based on this, a system with good effect was got through software simulation .After collimation and beam shaping, the beam in fast and slow axis has the same divergence angle which is less than 0.7mrad and the beam waist difference in z axis is less than 2.8mm.The result shows a good effect was obtained with a cylindrical gradient-index lens in this system.Under the condition of beam shaping and collimation, the LD beam has the characteristics of small divergence angle and rotationally symmetry .