激光技术
激光技術
격광기술
LASER TECHNOLOGY
2013年
4期
473-477
,共5页
李轩%赵尚弘%李勇军%朱子行%董毅%韩磊%赵静
李軒%趙尚弘%李勇軍%硃子行%董毅%韓磊%趙靜
리헌%조상홍%리용군%주자행%동의%한뢰%조정
光通信%直流偏置点自动控制%闭环反馈控制%双电极马赫-曾德尔电光调制器
光通信%直流偏置點自動控製%閉環反饋控製%雙電極馬赫-曾德爾電光調製器
광통신%직류편치점자동공제%폐배반궤공제%쌍전겁마혁-증덕이전광조제기
optical communication%direct-current bias point automatic control%closed-loop feedback control%dual-electrode Mach-Zehnder electro-optic modulator
为了实现对双电极马赫-曾德尔电光调制器任意直流偏置点的自动偏置控制,采用在闭环控制基础上,引入一个可调移相器使不同直流偏置点处误差信号相同的方法,理论分析了可调移相器相移量与直流偏置相位的关系,仿真得到对于不同偏置点,当调制器直流偏置相位漂移达-0.15rad ~0.08rad,移相器引入附加相位漂移-0.55rad~0.55rad时,经偏置控制后相位漂移被限制在-3.0×10-4 rad~1.7×10-4 rad范围内。结果表明,该方法有效实现了对电光调制器任意直流偏置点的自动偏置控制。
為瞭實現對雙電極馬赫-曾德爾電光調製器任意直流偏置點的自動偏置控製,採用在閉環控製基礎上,引入一箇可調移相器使不同直流偏置點處誤差信號相同的方法,理論分析瞭可調移相器相移量與直流偏置相位的關繫,倣真得到對于不同偏置點,噹調製器直流偏置相位漂移達-0.15rad ~0.08rad,移相器引入附加相位漂移-0.55rad~0.55rad時,經偏置控製後相位漂移被限製在-3.0×10-4 rad~1.7×10-4 rad範圍內。結果錶明,該方法有效實現瞭對電光調製器任意直流偏置點的自動偏置控製。
위료실현대쌍전겁마혁-증덕이전광조제기임의직류편치점적자동편치공제,채용재폐배공제기출상,인입일개가조이상기사불동직류편치점처오차신호상동적방법,이론분석료가조이상기상이량여직류편치상위적관계,방진득도대우불동편치점,당조제기직류편치상위표이체-0.15rad ~0.08rad,이상기인입부가상위표이-0.55rad~0.55rad시,경편치공제후상위표이피한제재-3.0×10-4 rad~1.7×10-4 rad범위내。결과표명,해방법유효실현료대전광조제기임의직류편치점적자동편치공제。
To control the bias of dual-electrode Mach-Zehnder electro-optic modulators automatically,an adjustable phase shifter was introduced based on closed-loop control method so that the error signal remained the same at different direct-current(DC)bias points.The relationship between phase shift of the adjustable shifter and DC bias phase was derived by theoretical analysis.Simulation showed that,the drift of DC bias phase in the range of -0.15rad~0.08rad with the added phase drift caused by the phase shifter in the range of -0.55rad~0.55rad could be suppressed to -3.0 ×10-4 rad~1.7 × 10-4 rad at different DC bias points.The results show that the automatic bias control of an electro-optic modulator at any DC bias points is effectively achieved.