CAJ | 학술논문

本文以波形刃可转位面铣刀片为研究对象分析了Ti6Al4V合金铣削加工过程中刀具的受力状态。通过有限元模拟与铣削实验相结合的方法研究了不同加工条件下刀具切削力的变化情况。结果表明：在Ti6Al4V合金的铣削加工过程中，切削力随着切削速度的增加而降低，随着进给量的增高而明显增大。
본문이파형인가전위면선도편위연구대상분석료Ti6Al4V합금선삭가공과정중도구적수력상태。통과유한원모의여선삭실험상결합적방법연구료불동가공조건하도구절삭력적변화정황。결과표명：재Ti6Al4V합금적선삭가공과정중，절삭력수착절삭속도적증가이강저，수착진급량적증고이명현증대。
The cutting force during the milling process of Ti6Al4V with waved-edge indexable milling inserts was researched. The effect of different cutting parameters on the cutting force was studied by FEM (finite element method) method combined with the milling experiments. The results indicated that the cutting force reduced with the increasing cutting speed and elevated with the increasing feed rate during the milling process of the Ti6Al4V alloy.