计算机仿真
計算機倣真
계산궤방진
COMPUTER SIMULATION
2013年
8期
426-430
,共5页
气液两相流%圆锥绕流%数值仿真%湍动能
氣液兩相流%圓錐繞流%數值倣真%湍動能
기액량상류%원추요류%수치방진%단동능
Gas-liquid two-phase flow%Conical flow%Numerical simulation%Turbulent kinetic energy
研究锥形物体在气液两相流场中动特性问题,对流场特性的影响和锥形物体自身的承载受力情况;采用CFD流体仿真软件FLUENT,用欧拉双流体模型结合Realizablek-ε湍流模型,对锥体在气液两相流场中的运动进行数值仿真.结果显示,在锥体尾部形成一组对称的回流涡,随着流体含液率的增加,主相空气相在中心轴线上的流向速度明显受到影响,尾涡变短,恢复速度变快;在绕流体的壁面上的流场的速度梯度会增大;同时绕流体周围的流场的压力梯度也会增大,湍动能和湍动能增量都会增大,与实验的结果基本吻合,验证了运用数值仿真的方法来研究气液两相锥体绕流问题是正确可行的.
研究錐形物體在氣液兩相流場中動特性問題,對流場特性的影響和錐形物體自身的承載受力情況;採用CFD流體倣真軟件FLUENT,用歐拉雙流體模型結閤Realizablek-ε湍流模型,對錐體在氣液兩相流場中的運動進行數值倣真.結果顯示,在錐體尾部形成一組對稱的迴流渦,隨著流體含液率的增加,主相空氣相在中心軸線上的流嚮速度明顯受到影響,尾渦變短,恢複速度變快;在繞流體的壁麵上的流場的速度梯度會增大;同時繞流體週圍的流場的壓力梯度也會增大,湍動能和湍動能增量都會增大,與實驗的結果基本吻閤,驗證瞭運用數值倣真的方法來研究氣液兩相錐體繞流問題是正確可行的.
연구추형물체재기액량상류장중동특성문제,대류장특성적영향화추형물체자신적승재수력정황;채용CFD류체방진연건FLUENT,용구랍쌍류체모형결합Realizablek-ε단류모형,대추체재기액량상류장중적운동진행수치방진.결과현시,재추체미부형성일조대칭적회류와,수착류체함액솔적증가,주상공기상재중심축선상적류향속도명현수도영향,미와변단,회복속도변쾌;재요류체적벽면상적류장적속도제도회증대;동시요류체주위적류장적압력제도야회증대,단동능화단동능증량도회증대,여실험적결과기본문합,험증료운용수치방진적방법래연구기액량상추체요류문제시정학가행적.