CAJ | 학술논문

在采用钨钼丝进行电火花加工工件的线切割机床中，由于切割而产生的钨钼丝直径磨损的程度往往直接影响到工件加工的精度。设计了通过采用单片机作为核心，通过控制三个步进电机在不同的位置使用数显千分尺进行数据采样，然后上传到上位机进行相应的修正，进行补偿计算，从而为实现精确加工提供依据。
재채용오목사진행전화화가공공건적선절할궤상중，유우절할이산생적오목사직경마손적정도왕왕직접영향도공건가공적정도。설계료통과채용단편궤작위핵심，통과공제삼개보진전궤재불동적위치사용수현천분척진행수거채양，연후상전도상위궤진행상응적수정，진행보상계산，종이위실현정학가공제공의거。
While processing workpiece using EDM with tungsten and molybdenum w ire, in the WEDM ,the m achining accuracy is alw ays affected by the extent of the cutting of tungsten molybdenum w ire diam eter. Using m icrocontroller as the core in the design, sam pling data with digital display m icrom eter through controlling three stepperm otorsatdifferentplaces,and then uploading to the hostcom puterforthe purpose ofcorresponding am end-m ent and compensation calculation,we eventually provide basis for the realization of precise m achining.