噪声与振动控制
譟聲與振動控製
조성여진동공제
NOISE AND VIBRATION CONTROL
2013年
5期
26-29
,共4页
陈学前%肖世富%刘信恩
陳學前%肖世富%劉信恩
진학전%초세부%류신은
振动与波%组合梁%不确定性%模型修正%建模%确认
振動與波%組閤樑%不確定性%模型脩正%建模%確認
진동여파%조합량%불학정성%모형수정%건모%학인
vibration and wave%assembled beam%uncertainty%model updating%modeling%validating
针对工程结构中普遍存在的装配不确定性,需开展考虑不确定性的有限元建模与确认。以一套组合梁结构为实例,对其进行了分层试验设计与各层次结构多工况的虚拟模态试验。并根据模型确定框架对其开展了不确定性参数的识别、量化以及模型的确认研究。展示了考虑不确定性因素结构的有限元建模与传统确定性结构有限元建模的异同,可为其他工程结构开展类似的工作提供借鉴。
針對工程結構中普遍存在的裝配不確定性,需開展攷慮不確定性的有限元建模與確認。以一套組閤樑結構為實例,對其進行瞭分層試驗設計與各層次結構多工況的虛擬模態試驗。併根據模型確定框架對其開展瞭不確定性參數的識彆、量化以及模型的確認研究。展示瞭攷慮不確定性因素結構的有限元建模與傳統確定性結構有限元建模的異同,可為其他工程結構開展類似的工作提供藉鑒。
침대공정결구중보편존재적장배불학정성,수개전고필불학정성적유한원건모여학인。이일투조합량결구위실례,대기진행료분층시험설계여각층차결구다공황적허의모태시험。병근거모형학정광가대기개전료불학정성삼수적식별、양화이급모형적학인연구。전시료고필불학정성인소결구적유한원건모여전통학정성결구유한원건모적이동,가위기타공정결구개전유사적공작제공차감。
Finite element modeling and validating for structural uncertainty are necessary for the wide existence of the uncertainties in the assemblage process of engineering structures. The multi-case virtual modal tests were done for a set of composite beam structures. The identification and quantification of uncertainty parameters and the model validation were performed via a validated frame of the model. This study shows the difference between the finite element models with and without the consideration of the structural uncertainties, and has provided a reference for similar engineering cases.