探矿工程-岩土钻掘工程
探礦工程-巖土鑽掘工程
탐광공정-암토찬굴공정
EXPLORATION ENGINEERING (DRILLING & TUNNELING)
2013年
8期
64-66
,共3页
牟培英%董萌萌%许翠华%莫海涛
牟培英%董萌萌%許翠華%莫海濤
모배영%동맹맹%허취화%막해도
近水平定向钻进%套铣打捞工艺%打捞钻杆
近水平定嚮鑽進%套鐉打撈工藝%打撈鑽桿
근수평정향찬진%투선타로공예%타로찬간
nearly horizontal directional drilling%sleeve fishing technology%fishing rod
通过对常用定向钻进配套钻具打捞工艺的对比分析,明确了采用套铣打捞工艺处理煤矿井下近水平定向钻进中出现的塌孔、卡钻、埋钻等孔内事故的可行性与实用性。根据其工艺施工要求,结合煤矿井下近水平定向钻进系统配套钻具具体参数,研制了能够满足额定扭矩6000 N· m钻机使用要求的定向钻进套铣打捞钻杆。成庄矿的应用表明,采用套铣打捞工艺处理近水平定向钻进时孔内事故(塌孔、卡钻、埋钻等)可行性较强,且套铣打捞钻杆结构设计合理,能满足套铣打捞工艺的使用要求。
通過對常用定嚮鑽進配套鑽具打撈工藝的對比分析,明確瞭採用套鐉打撈工藝處理煤礦井下近水平定嚮鑽進中齣現的塌孔、卡鑽、埋鑽等孔內事故的可行性與實用性。根據其工藝施工要求,結閤煤礦井下近水平定嚮鑽進繫統配套鑽具具體參數,研製瞭能夠滿足額定扭矩6000 N· m鑽機使用要求的定嚮鑽進套鐉打撈鑽桿。成莊礦的應用錶明,採用套鐉打撈工藝處理近水平定嚮鑽進時孔內事故(塌孔、卡鑽、埋鑽等)可行性較彊,且套鐉打撈鑽桿結構設計閤理,能滿足套鐉打撈工藝的使用要求。
통과대상용정향찬진배투찬구타로공예적대비분석,명학료채용투선타로공예처리매광정하근수평정향찬진중출현적탑공、잡찬、매찬등공내사고적가행성여실용성。근거기공예시공요구,결합매광정하근수평정향찬진계통배투찬구구체삼수,연제료능구만족액정뉴구6000 N· m찬궤사용요구적정향찬진투선타로찬간。성장광적응용표명,채용투선타로공예처리근수평정향찬진시공내사고(탑공、잡찬、매찬등)가행성교강,차투선타로찬간결구설계합리,능만족투선타로공예적사용요구。
By the comparative analysis on the common fishing technologies of matching tools for directional drilling, the fea-sibility and practicability of sleeve fishing technology are made clear for handling the hole accidents in nearly horizontal di-rectional drilling.According to the requirements of the construction technology and based on the specific parameters of the drilling tools in nearly horizontal directional drilling, the sleeve fishing rod for directional drilling is developed, which can match the rig with rated torque 6000N· m.The successful application in Chengzhuang coalmine proved the feasibility of sleeve fishing technology which can satisfy the application requirement with the rational structure.