CAJ | 학술논문

为了提高机床加工精度和生产效率，本次设计所要解决的主要问题，是应用PLC技术改造了C534J双柱立式车床的电气控制系统。主要是运用PLC软件进行编程对主轴控制，左右两个刀架控制，横梁升降控制，横梁夹紧控制。通过PLC技术改造，不但可简化控制线路，而且故障率低，可靠性能高，完全可满足该机床的加工要求。
위료제고궤상가공정도화생산효솔，본차설계소요해결적주요문제，시응용PLC기술개조료C534J쌍주입식차상적전기공제계통。주요시운용PLC연건진행편정대주축공제，좌우량개도가공제，횡량승강공제，횡량협긴공제。통과PLC기술개조，불단가간화공제선로，이차고장솔저，가고성능고，완전가만족해궤상적가공요구。
In order to improve the working accuracy and production efifciency of the machine.The problem solved in this design is mainly the electrical control units of model C534J is an universal vertical lathe with double columns can be changed by PLC program through technical innovation.Use software PLC to carry on programming,spindle control,two turrets in left and right sides control,beam up down control,beam clamp control.By PLC program through technical innovation,therefore the ratio of repair wil be reduced and the control circuits wil be simpliifed,the need of machining requirements wil be met entirely.