仪表技术与传感器
儀錶技術與傳感器
의표기술여전감기
INSTRUMENT TECHNIQUE AND SENSOR
2013年
7期
5-8
,共4页
电容传感器%张弛振荡电路%气固两相流%标定
電容傳感器%張弛振盪電路%氣固兩相流%標定
전용전감기%장이진탕전로%기고량상류%표정
capacitance sensor%relaxation oscillation circuit%gas-solid two-phase flow%calibration
基于电容传感器的气固两相流测量技术被认为是最有前途的气固流测量技术,而电容传感器接口电路是电容传感器乃至电容法气固两相流测量技术研发和应用的关键.微小电容测量的难点在于杂散电容的存在以及电磁干扰,而张弛振荡电路可以通过差动结构消除待测电容两端的杂散电容,电路工作稳定性较高,电路还可以将电容值通过振荡的方式转化为只有高低电平的脉冲宽度,便于不受干扰的传输测量结果,同时使用合理的微处理器可实现对脉宽的高精度测量,从而提高测量电路整体的灵敏性与分辨力.为了应用于气固流相浓度测量,使用带参比电容的张弛振荡电路,并进行了性能测试.结果表明,带参比电容的张弛振荡接口电路迟滞误差为0.30%,非线性误差为0.30%,重复性误差为0.32%,可以在气固两相流相浓度测量中应用.
基于電容傳感器的氣固兩相流測量技術被認為是最有前途的氣固流測量技術,而電容傳感器接口電路是電容傳感器迺至電容法氣固兩相流測量技術研髮和應用的關鍵.微小電容測量的難點在于雜散電容的存在以及電磁榦擾,而張弛振盪電路可以通過差動結構消除待測電容兩耑的雜散電容,電路工作穩定性較高,電路還可以將電容值通過振盪的方式轉化為隻有高低電平的脈遲寬度,便于不受榦擾的傳輸測量結果,同時使用閤理的微處理器可實現對脈寬的高精度測量,從而提高測量電路整體的靈敏性與分辨力.為瞭應用于氣固流相濃度測量,使用帶參比電容的張弛振盪電路,併進行瞭性能測試.結果錶明,帶參比電容的張弛振盪接口電路遲滯誤差為0.30%,非線性誤差為0.30%,重複性誤差為0.32%,可以在氣固兩相流相濃度測量中應用.
기우전용전감기적기고량상류측량기술피인위시최유전도적기고류측량기술,이전용전감기접구전로시전용전감기내지전용법기고량상류측량기술연발화응용적관건.미소전용측량적난점재우잡산전용적존재이급전자간우,이장이진탕전로가이통과차동결구소제대측전용량단적잡산전용,전로공작은정성교고,전로환가이장전용치통과진탕적방식전화위지유고저전평적맥충관도,편우불수간우적전수측량결과,동시사용합리적미처리기가실현대맥관적고정도측량,종이제고측량전로정체적령민성여분변력.위료응용우기고류상농도측량,사용대삼비전용적장이진탕전로,병진행료성능측시.결과표명,대삼비전용적장이진탕접구전로지체오차위0.30%,비선성오차위0.30%,중복성오차위0.32%,가이재기고량상류상농도측량중응용.