武汉科技大学学报(自然科学版)
武漢科技大學學報(自然科學版)
무한과기대학학보(자연과학판)
JOURNAL OF WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY(NATURAL SCIENCE EDITION)
2013年
4期
241-245
,共5页
程常桂%齐士兵%陈雄%金焱%钟保军%蔡士中
程常桂%齊士兵%陳雄%金焱%鐘保軍%蔡士中
정상계%제사병%진웅%금염%종보군%채사중
连铸%40Cr%大方坯%凝固%传热行为
連鑄%40Cr%大方坯%凝固%傳熱行為
련주%40Cr%대방배%응고%전열행위
continuous casting%40Cr steel%bloom%solidification%heat transfer behavior
针对某钢厂40Cr大方坯连铸工艺生产条件,建立二维非稳态传热模型,利用射钉实验结果修正传热模型.传热模型计算分析结果表明,工况配水方案下,二冷一区、二冷二区回热速率偏高,铸坯出结晶器坯壳厚度较厚,结晶器冷却强度有降低空间;随距铸坯表面中心距离的增大,铸坯内温度梯度逐渐减小,到铸坯中心区域,温度梯度差异很小;随距弯月面距离的增大,铸坯表面到中心连线上某一相同位置的温度梯度先逐渐减小,后逐渐增大;随冷却强度增大,铸坯柱状晶向等轴晶转变区域温度梯度增大,但单纯增大二冷五区冷却强度,温度梯度增大效果不明显.
針對某鋼廠40Cr大方坯連鑄工藝生產條件,建立二維非穩態傳熱模型,利用射釘實驗結果脩正傳熱模型.傳熱模型計算分析結果錶明,工況配水方案下,二冷一區、二冷二區迴熱速率偏高,鑄坯齣結晶器坯殼厚度較厚,結晶器冷卻彊度有降低空間;隨距鑄坯錶麵中心距離的增大,鑄坯內溫度梯度逐漸減小,到鑄坯中心區域,溫度梯度差異很小;隨距彎月麵距離的增大,鑄坯錶麵到中心連線上某一相同位置的溫度梯度先逐漸減小,後逐漸增大;隨冷卻彊度增大,鑄坯柱狀晶嚮等軸晶轉變區域溫度梯度增大,但單純增大二冷五區冷卻彊度,溫度梯度增大效果不明顯.
침대모강엄40Cr대방배련주공예생산조건,건립이유비은태전열모형,이용사정실험결과수정전열모형.전열모형계산분석결과표명,공황배수방안하,이랭일구、이랭이구회열속솔편고,주배출결정기배각후도교후,결정기냉각강도유강저공간;수거주배표면중심거리적증대,주배내온도제도축점감소,도주배중심구역,온도제도차이흔소;수거만월면거리적증대,주배표면도중심련선상모일상동위치적온도제도선축점감소,후축점증대;수냉각강도증대,주배주상정향등축정전변구역온도제도증대,단단순증대이랭오구냉각강도,온도제도증대효과불명현.