化学与生物工程
化學與生物工程
화학여생물공정
CHEMISTRY & BIOENGINEERING
2013年
6期
56-58,86
,共4页
肖碧鹏%章颖%樊继亮%朱宗民%朱杰%黄齐茂%潘志权
肖碧鵬%章穎%樊繼亮%硃宗民%硃傑%黃齊茂%潘誌權
초벽붕%장영%번계량%주종민%주걸%황제무%반지권
膨胀型阻燃剂%合成%双-(2,4,6-三溴苯基)磷酸二酯二三聚氰胺盐
膨脹型阻燃劑%閤成%雙-(2,4,6-三溴苯基)燐痠二酯二三聚氰胺鹽
팽창형조연제%합성%쌍-(2,4,6-삼추분기)린산이지이삼취청알염
intumescent flame retardant%synthesis%bis(2,4,6-tribromophenyl) phosphoric dimelamine salt
以苯酚、溴素、双氧水、三氯氧磷、三聚氰胺等为原料,经三步合成含磷—氮—溴膨胀型阻燃剂双-(2,4,6-三溴苯基)磷酸二酯二三聚氰胺盐.第一步以乙醇为溶剂,苯酚、溴素与双氧水的摩尔比为1∶1.55∶1.78时,中间体Ⅰ三溴苯酚的收率达到98.2%;第二步以苯为溶剂、吡啶为缚酸剂,中间体Ⅰ与三氯氧磷的摩尔比为2.3∶1时,中间体Ⅱ的收率达到89.1%;第三步以DMSO为溶剂,反应温度为130℃,目标产物Ⅲ的收率达到95.8%.采用红外光谱和质谱对中间体及目标产物进行了结构表征.
以苯酚、溴素、雙氧水、三氯氧燐、三聚氰胺等為原料,經三步閤成含燐—氮—溴膨脹型阻燃劑雙-(2,4,6-三溴苯基)燐痠二酯二三聚氰胺鹽.第一步以乙醇為溶劑,苯酚、溴素與雙氧水的摩爾比為1∶1.55∶1.78時,中間體Ⅰ三溴苯酚的收率達到98.2%;第二步以苯為溶劑、吡啶為縳痠劑,中間體Ⅰ與三氯氧燐的摩爾比為2.3∶1時,中間體Ⅱ的收率達到89.1%;第三步以DMSO為溶劑,反應溫度為130℃,目標產物Ⅲ的收率達到95.8%.採用紅外光譜和質譜對中間體及目標產物進行瞭結構錶徵.
이분분、추소、쌍양수、삼록양린、삼취청알등위원료,경삼보합성함린—담—추팽창형조연제쌍-(2,4,6-삼추분기)린산이지이삼취청알염.제일보이을순위용제,분분、추소여쌍양수적마이비위1∶1.55∶1.78시,중간체Ⅰ삼추분분적수솔체도98.2%;제이보이분위용제、필정위박산제,중간체Ⅰ여삼록양린적마이비위2.3∶1시,중간체Ⅱ적수솔체도89.1%;제삼보이DMSO위용제,반응온도위130℃,목표산물Ⅲ적수솔체도95.8%.채용홍외광보화질보대중간체급목표산물진행료결구표정.