中国空间科学技术
中國空間科學技術
중국공간과학기술
CHINESE SPACE SCIENCE AND TECHNOLOGY
2013年
3期
57-63,71
,共8页
张鑫%李垣陵%肖志斌%欧钢
張鑫%李垣陵%肖誌斌%歐鋼
장흠%리원릉%초지빈%구강
信道模拟系统%时延标校接收机%零值在线标校%多址干扰%卫星导航系统
信道模擬繫統%時延標校接收機%零值在線標校%多阯榦擾%衛星導航繫統
신도모의계통%시연표교접수궤%령치재선표교%다지간우%위성도항계통
Channel simulation system%Delay calibration receiver%On-line delay calibration%Multiple access interference%Satellite navigation system
利用信道模拟系统进行卫星导航系统仿真试验过程中,环境模拟通道的零值漂移会造成无法消除的系统误差,因此需要在仿真运行的过程中对通道零值进行在线标校.基于直接序列扩频体制时延标校接收机的传统零值标校方法,无法解决在线标校时通道零值与设定空间仿真传输时延耦合及多址干扰问题.根据环境模拟通道的空间仿真传输时延变化机理,提出了分离通道零值与设定空间仿真传输时延的方法,并对自校信号测量时的多址干扰强度及抑制方法进行了分析.经过理论分析和仿真计算,所提出的在线零值标校方法精度可达亚纳秒量级.
利用信道模擬繫統進行衛星導航繫統倣真試驗過程中,環境模擬通道的零值漂移會造成無法消除的繫統誤差,因此需要在倣真運行的過程中對通道零值進行在線標校.基于直接序列擴頻體製時延標校接收機的傳統零值標校方法,無法解決在線標校時通道零值與設定空間倣真傳輸時延耦閤及多阯榦擾問題.根據環境模擬通道的空間倣真傳輸時延變化機理,提齣瞭分離通道零值與設定空間倣真傳輸時延的方法,併對自校信號測量時的多阯榦擾彊度及抑製方法進行瞭分析.經過理論分析和倣真計算,所提齣的在線零值標校方法精度可達亞納秒量級.
이용신도모의계통진행위성도항계통방진시험과정중,배경모의통도적령치표이회조성무법소제적계통오차,인차수요재방진운행적과정중대통도령치진행재선표교.기우직접서렬확빈체제시연표교접수궤적전통령치표교방법,무법해결재선표교시통도령치여설정공간방진전수시연우합급다지간우문제.근거배경모의통도적공간방진전수시연변화궤리,제출료분리통도령치여설정공간방진전수시연적방법,병대자교신호측량시적다지간우강도급억제방법진행료분석.경과이론분석화방진계산,소제출적재선령치표교방법정도가체아납초량급.