稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2013年
8期
1627-1631
,共5页
彭建%童小山%尚守亮%潘复生
彭建%童小山%尚守亮%潘複生
팽건%동소산%상수량%반복생
Mg-6Zn-1Mn镁合金%热压缩%本构方程%加工图%功率耗散率
Mg-6Zn-1Mn鎂閤金%熱壓縮%本構方程%加工圖%功率耗散率
Mg-6Zn-1Mn미합금%열압축%본구방정%가공도%공솔모산솔
Mg-6Zn-1Mn alloy%hot compression%constitutive equation%processing map%efficiency of power dissipation
采用Gleeble-1500热/力模拟试验机进行压缩试验,研究了Mg-6Zn-1Mn合金在变形温度250~450℃、应变速率0.001~10 s-1范围内的流变应力行为,采用Zener-Hollomon参数法构建合金高温塑性变形的本构关系;并以热压缩试验为基础,建立并初步分析了Mg-6Zn-1Mn合金的DMM加工图.结果表明:Mg-6Zn-1Mn合金在热压缩过程中发生了明显的动态回复与动态再结晶,流变应力随应变速率的增加而增加,随温度的升高而降低;流变应力的预测值与试验值较吻合;建立的加工图表明合金高温变形时存在2个失稳区域,而在温度325~425℃、应变速率0.01~0.365 s-1范围内出现1个非失稳区、功率耗散峰值区,该区域最适合Mg-6Zn-1Mn合金进行热加工.
採用Gleeble-1500熱/力模擬試驗機進行壓縮試驗,研究瞭Mg-6Zn-1Mn閤金在變形溫度250~450℃、應變速率0.001~10 s-1範圍內的流變應力行為,採用Zener-Hollomon參數法構建閤金高溫塑性變形的本構關繫;併以熱壓縮試驗為基礎,建立併初步分析瞭Mg-6Zn-1Mn閤金的DMM加工圖.結果錶明:Mg-6Zn-1Mn閤金在熱壓縮過程中髮生瞭明顯的動態迴複與動態再結晶,流變應力隨應變速率的增加而增加,隨溫度的升高而降低;流變應力的預測值與試驗值較吻閤;建立的加工圖錶明閤金高溫變形時存在2箇失穩區域,而在溫度325~425℃、應變速率0.01~0.365 s-1範圍內齣現1箇非失穩區、功率耗散峰值區,該區域最適閤Mg-6Zn-1Mn閤金進行熱加工.
채용Gleeble-1500열/력모의시험궤진행압축시험,연구료Mg-6Zn-1Mn합금재변형온도250~450℃、응변속솔0.001~10 s-1범위내적류변응역행위,채용Zener-Hollomon삼수법구건합금고온소성변형적본구관계;병이열압축시험위기출,건립병초보분석료Mg-6Zn-1Mn합금적DMM가공도.결과표명:Mg-6Zn-1Mn합금재열압축과정중발생료명현적동태회복여동태재결정,류변응력수응변속솔적증가이증가,수온도적승고이강저;류변응력적예측치여시험치교문합;건립적가공도표명합금고온변형시존재2개실은구역,이재온도325~425℃、응변속솔0.01~0.365 s-1범위내출현1개비실은구、공솔모산봉치구,해구역최괄합Mg-6Zn-1Mn합금진행열가공.