机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2013年
10期
242-245
,共4页
虞诗强%霍军周%吴承原%孙伟
虞詩彊%霍軍週%吳承原%孫偉
우시강%곽군주%오승원%손위
EPB盾构机%盾构刀盘%开口率%离散元%有限元%耦合设计
EPB盾構機%盾構刀盤%開口率%離散元%有限元%耦閤設計
EPB순구궤%순구도반%개구솔%리산원%유한원%우합설계
EPB-TBM%Cutting Wheel%Aperture Opening Ratio%Discrete Element%Finite Element%Coupling Design
以某地铁标段施工盾构为研究对象,针对EPB盾构机的刀盘的开口模式与盘体结构设计之间相互影响、耦合的特点,首先建立根据边界条件与三轴实验获得的岩土颗粒微观参数构建盾构刀盘与岩土相互作用的刀盘系统离散元数值模型,研究盾构刀盘开口率对刀盘挖掘过程的影响规律.在此基础上,建立基于渣土流动性的刀盘结构参数优化设计模型,在AWE下对刀盘的整体结构进行优化设计.研究结果表明:在某地质条件下,开口率为35%,中心开口占45%的刀盘挖掘效率较高且满足螺旋输送系统工作条件.
以某地鐵標段施工盾構為研究對象,針對EPB盾構機的刀盤的開口模式與盤體結構設計之間相互影響、耦閤的特點,首先建立根據邊界條件與三軸實驗穫得的巖土顆粒微觀參數構建盾構刀盤與巖土相互作用的刀盤繫統離散元數值模型,研究盾構刀盤開口率對刀盤挖掘過程的影響規律.在此基礎上,建立基于渣土流動性的刀盤結構參數優化設計模型,在AWE下對刀盤的整體結構進行優化設計.研究結果錶明:在某地質條件下,開口率為35%,中心開口佔45%的刀盤挖掘效率較高且滿足螺鏇輸送繫統工作條件.
이모지철표단시공순구위연구대상,침대EPB순구궤적도반적개구모식여반체결구설계지간상호영향、우합적특점,수선건립근거변계조건여삼축실험획득적암토과립미관삼수구건순구도반여암토상호작용적도반계통리산원수치모형,연구순구도반개구솔대도반알굴과정적영향규률.재차기출상,건립기우사토류동성적도반결구삼수우화설계모형,재AWE하대도반적정체결구진행우화설계.연구결과표명:재모지질조건하,개구솔위35%,중심개구점45%적도반알굴효솔교고차만족라선수송계통공작조건.