机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2013年
10期
122-123,127
,共3页
吴定柱%刘兴宝%蒋家东%钱志强%岳晓斌
吳定柱%劉興寶%蔣傢東%錢誌彊%嶽曉斌
오정주%류흥보%장가동%전지강%악효빈
四极质量分析器%双曲面极杆%组合加工%比较测量
四極質量分析器%雙麯麵極桿%組閤加工%比較測量
사겁질량분석기%쌍곡면겁간%조합가공%비교측량
Quadrupole Mass Filter%Hyperboloidal Pole%Assembled Machining%Comparative Measure
作为研究物质基本组成、结构特征、物理和化学性质的最基本的仪器一质谱仪,由于其直接测量的本质和高灵敏、高分辨性,被广泛应用于环境监测、食品安全、生命科学等多个领域.四极质量分析器是四极式质谱仪的核心部件,其零件及部件主要精度误差都要求小于0.005mm,传统制造工艺已经无法满足要求.提出了一种零件组合和部件组合加工方法,利用该方法加工了一套双曲面型四极质量分析器,加工后零件的表面粗糙度为Ra0.2μm、两组对杆140mm范围内平行度4μm.
作為研究物質基本組成、結構特徵、物理和化學性質的最基本的儀器一質譜儀,由于其直接測量的本質和高靈敏、高分辨性,被廣汎應用于環境鑑測、食品安全、生命科學等多箇領域.四極質量分析器是四極式質譜儀的覈心部件,其零件及部件主要精度誤差都要求小于0.005mm,傳統製造工藝已經無法滿足要求.提齣瞭一種零件組閤和部件組閤加工方法,利用該方法加工瞭一套雙麯麵型四極質量分析器,加工後零件的錶麵粗糙度為Ra0.2μm、兩組對桿140mm範圍內平行度4μm.
작위연구물질기본조성、결구특정、물리화화학성질적최기본적의기일질보의,유우기직접측량적본질화고령민、고분변성,피엄범응용우배경감측、식품안전、생명과학등다개영역.사겁질량분석기시사겁식질보의적핵심부건,기령건급부건주요정도오차도요구소우0.005mm,전통제조공예이경무법만족요구.제출료일충령건조합화부건조합가공방법,이용해방법가공료일투쌍곡면형사겁질량분석기,가공후령건적표면조조도위Ra0.2μm、량조대간140mm범위내평행도4μm.