CAJ | 학술논문

采用物理浸渍法将[C5 mim ]HSO4（1-戊基-3-甲基咪唑硫酸氢盐离子液体）负载在分子筛表面，得到分子筛负载型离子液体。采用萃取氧化法，考察了负载型离子液体对催化裂化汽油的脱硫效果。结果表明，分子筛孔道大小对脱硫效果有一定的影响。以NaY分子筛为负载剂，质量分数为35％的 H2 O2为氧化剂，考察了氧化剂加入体积、萃取时间、剂油体积比等不同条件对催化裂化汽油的脱硫效果。确定了最佳脱硫实验条件为10 g负载型咪唑硫酸氢根离子液体，100 mL FCC汽油，1 mL H2 O2，40℃下反应60 min后对汽油有较高的脱硫率，一次脱硫率可达94％，初始含硫质量分数为200μg/g的汽油经一次脱硫后含硫质量分数可降至10μg/g以下。反应结束后，通过简单的倾倒使负载型离子液体与汽油分离，负载型离子液体通过回收后可重复使用。
채용물리침지법장[C5 mim ]HSO4（1-무기-3-갑기미서류산경염리자액체）부재재분자사표면，득도분자사부재형리자액체。채용췌취양화법，고찰료부재형리자액체대최화열화기유적탈류효과。결과표명，분자사공도대소대탈류효과유일정적영향。이NaY분자사위부재제，질량분수위35％적 H2 O2위양화제，고찰료양화제가입체적、췌취시간、제유체적비등불동조건대최화열화기유적탈류효과。학정료최가탈류실험조건위10 g부재형미서류산경근리자액체，100 mL FCC기유，1 mL H2 O2，40℃하반응60 min후대기유유교고적탈류솔，일차탈류솔가체94％，초시함류질량분수위200μg/g적기유경일차탈류후함류질량분수가강지10μg/g이하。반응결속후，통과간단적경도사부재형리자액체여기유분리，부재형리자액체통과회수후가중복사용。
The immobilized 1-amyl-3-methylimidazolium hydrosulfate ionic liquid was obtained by physical impregnation on molecular sieve . The oxidation-extraction desulfurization effect of FCC gasoline using supported ionic liquid (SIL ) were investigated .The results show that ,the pore size of molecular sieve have certain impact on the desulfurization effect .With NaY molecular sieve as loading material ,hydrogen peroxide (35% ) as the oxidant ,the desulfurization condition were optimized by varying oxidant dosage ,extraction time ,the ratio of ILs/oil ,and so on .The best desulfurization rate was obtained after 60 min under the condition of 10 g SIL and 100 mL oil and 1 mL H2 O2 ,at 40 ℃ with the sufur removal of 94% for FCC gasoline . The sulfur content of FCC gasoline has decreased to 10 μg/g below .After the reaction ,the fuel oil and supported ionic liquid can be separated simply by decantation ,the supported ionic liquid can be recycled .