石油化工
石油化工
석유화공
PETROCHEMICAL TECHNOLOGY
2013年
9期
984-989
,共6页
柏基业%王校铮%田洲%冯连芳
柏基業%王校錚%田洲%馮連芳
백기업%왕교쟁%전주%풍련방
气相乙烯聚合%流化床反应器%乳化相%气泡相%温度分布%模拟
氣相乙烯聚閤%流化床反應器%乳化相%氣泡相%溫度分佈%模擬
기상을희취합%류화상반응기%유화상%기포상%온도분포%모의
gas phase ethylene polymerization%fluidized bed reactor%emulsion phase%bubble phase%temperature distribution%simulation
针对Unipol聚乙烯工艺的流化床反应器内温度分布不均匀问题,建立了全混流(CSTRs)串联模型、乳化相NCSTRs串联模型和乳化相全混流模型.与工业装置所测温度分布比较表明,乳化相全混流模型最适用于描述流化床层的温度分布.采用调整气泡相分区以及串联CSTR个数的方法确定乳化相全混流模型参数为乳化相为1个CSTR,气泡相为26个串联的CSTRs;该模型可准确描述流化床层的温度分布,催化剂进料口附近的床层温升较快(7℃),反应器上部区域温度梯度较小(小于2℃);结合聚合反应动力学,该模型可预测工业乙烯聚合过程的聚合产量和产品密度等性质.
針對Unipol聚乙烯工藝的流化床反應器內溫度分佈不均勻問題,建立瞭全混流(CSTRs)串聯模型、乳化相NCSTRs串聯模型和乳化相全混流模型.與工業裝置所測溫度分佈比較錶明,乳化相全混流模型最適用于描述流化床層的溫度分佈.採用調整氣泡相分區以及串聯CSTR箇數的方法確定乳化相全混流模型參數為乳化相為1箇CSTR,氣泡相為26箇串聯的CSTRs;該模型可準確描述流化床層的溫度分佈,催化劑進料口附近的床層溫升較快(7℃),反應器上部區域溫度梯度較小(小于2℃);結閤聚閤反應動力學,該模型可預測工業乙烯聚閤過程的聚閤產量和產品密度等性質.
침대Unipol취을희공예적류화상반응기내온도분포불균균문제,건립료전혼류(CSTRs)천련모형、유화상NCSTRs천련모형화유화상전혼류모형.여공업장치소측온도분포비교표명,유화상전혼류모형최괄용우묘술류화상층적온도분포.채용조정기포상분구이급천련CSTR개수적방법학정유화상전혼류모형삼수위유화상위1개CSTR,기포상위26개천련적CSTRs;해모형가준학묘술류화상층적온도분포,최화제진료구부근적상층온승교쾌(7℃),반응기상부구역온도제도교소(소우2℃);결합취합반응동역학,해모형가예측공업을희취합과정적취합산량화산품밀도등성질.