电子科技大学学报
電子科技大學學報
전자과기대학학보
JOURNAL OF UNIVERSITY OF ELECTRONIC SCIENCE AND TECHNOLOGY OF CHINA
2013年
5期
705-710
,共6页
张斐%许建平%杨平%阎铁生
張斐%許建平%楊平%閻鐵生
장비%허건평%양평%염철생
高功率因数%功率因数校正变换器%伪连续导电模式%三态%宽负载范围
高功率因數%功率因數校正變換器%偽連續導電模式%三態%寬負載範圍
고공솔인수%공솔인수교정변환기%위련속도전모식%삼태%관부재범위
high power factor (PF)%power factor correction (PFC) converter%pseudo continuous conduction mode (PCCM)%tri-state%wide range of load
分析工作于伪连续导电模式(PCCM)的Boost功率因数校正(PFC)变换器,设计电压环与电流环并行的控制环路。针对传统连续导电模式(CCM)和不连续导电模式(DCM)Boost PFC变换器负载功率范围受限的问题,研究以负载电流为基准量实时调整参考电流的控制策略,给出其网侧输入电流和功率因数的表达式。为了在宽输入电压范围内提高正弦参考电流控制三态PCCM Boost PFC变换器的功率因数(PF),提出非正弦参考电流控制算法。此外建立小信号模型给出其频域分析结果。最后通过实验结果验证了理论分析的正确性。
分析工作于偽連續導電模式(PCCM)的Boost功率因數校正(PFC)變換器,設計電壓環與電流環併行的控製環路。針對傳統連續導電模式(CCM)和不連續導電模式(DCM)Boost PFC變換器負載功率範圍受限的問題,研究以負載電流為基準量實時調整參攷電流的控製策略,給齣其網側輸入電流和功率因數的錶達式。為瞭在寬輸入電壓範圍內提高正絃參攷電流控製三態PCCM Boost PFC變換器的功率因數(PF),提齣非正絃參攷電流控製算法。此外建立小信號模型給齣其頻域分析結果。最後通過實驗結果驗證瞭理論分析的正確性。
분석공작우위련속도전모식(PCCM)적Boost공솔인수교정(PFC)변환기,설계전압배여전류배병행적공제배로。침대전통련속도전모식(CCM)화불련속도전모식(DCM)Boost PFC변환기부재공솔범위수한적문제,연구이부재전류위기준량실시조정삼고전류적공제책략,급출기망측수입전류화공솔인수적표체식。위료재관수입전압범위내제고정현삼고전류공제삼태PCCM Boost PFC변환기적공솔인수(PF),제출비정현삼고전류공제산법。차외건립소신호모형급출기빈역분석결과。최후통과실험결과험증료이론분석적정학성。
A Boost power factor correction (PFC) converter operating in pseudo continuous conduction mode (PCCM) is analyzed and side-by-side voltage and current control loops is proposed. In order to extend the load power range of the conventional Boost PFC converter operating in continuous conduction mode (CCM) and discontinuous conduction mode (DCM), a control strategy to adjust the reference current with respect to the load is designed. The input current and PF expression of the tri-state PCCM Boost PFC converter is also derived. To improve the input power factor (PF) of the tri-state PCCM Boost PFC converter with sinusoidal reference current control strategy over whole input voltage range, the non-sinusoidal reference current control strategy is proposed. Besides, the frequency domain analysis based on small-signal mode is given. Finally, the tri-state PCCM Boost PFC converter prototype is built and the experimental results verify the analysis results.