机床与液压
機床與液壓
궤상여액압
MACHINE TOOL & HYDRAULICS
2013年
17期
34-37
,共4页
崔皆凡%单宝钰%秦超%刘艳
崔皆凡%單寶鈺%秦超%劉豔
최개범%단보옥%진초%류염
空间矢量脉宽调制%开关频率%损耗%谐波分析%仿真
空間矢量脈寬調製%開關頻率%損耗%諧波分析%倣真
공간시량맥관조제%개관빈솔%손모%해파분석%방진
SVPWM%Switching frequency%Losses%Harmonic analysis%Simulation
针对传统SVPWM调制方式不能有效地减小开关损耗及逆变器产生的电流谐波,导致电机工作效率降低,并且使电机转矩脉动增加的问题,通过分析SVPWM调制技术的原理,找出影响开关损耗的因素,对比不同工作情况下的SVP-WM调制方式,提出最小损耗SVPWM调制方法。这种方法能够对零矢量进行最优分配,达到降低开关损耗、减小输出信号谐波含量的目的。对传统方法和该优化方法进行了开关损耗以及逆变器电流谐波分析比较,仿真结果验证了该优化方法的正确性和合理性。
針對傳統SVPWM調製方式不能有效地減小開關損耗及逆變器產生的電流諧波,導緻電機工作效率降低,併且使電機轉矩脈動增加的問題,通過分析SVPWM調製技術的原理,找齣影響開關損耗的因素,對比不同工作情況下的SVP-WM調製方式,提齣最小損耗SVPWM調製方法。這種方法能夠對零矢量進行最優分配,達到降低開關損耗、減小輸齣信號諧波含量的目的。對傳統方法和該優化方法進行瞭開關損耗以及逆變器電流諧波分析比較,倣真結果驗證瞭該優化方法的正確性和閤理性。
침대전통SVPWM조제방식불능유효지감소개관손모급역변기산생적전류해파,도치전궤공작효솔강저,병차사전궤전구맥동증가적문제,통과분석SVPWM조제기술적원리,조출영향개관손모적인소,대비불동공작정황하적SVP-WM조제방식,제출최소손모SVPWM조제방법。저충방법능구대령시량진행최우분배,체도강저개관손모、감소수출신호해파함량적목적。대전통방법화해우화방법진행료개관손모이급역변기전류해파분석비교,방진결과험증료해우화방법적정학성화합이성。
Conventional SVPWM modulation methods dont reduce switch losses and current harmonic generated by inverter ef-fectively,so the quality of the output signal is affected,motor work efficiency is low and the motor torque ripple is increased. The prin-ciples of SVPWM were introduced. A new SVPWM modulation technique was proposed by analyzing the influence factors on the switch losses,which can effectively reduce switch losses and harmonic. Using this method,the purpose of decreasing switching losses and re-ducing the harmonic content of the output signal could be achieved through executing the optimal distribution of zero vector. Switch los-ses and harmonic generated by inverter of the traditional method and the new method were compared. Correctness and feasibility of the new method are testified.