CAJ | 학술논문

针对一种带蒙皮板的木结构组合板进行了试验研究，得出其承载力，并与未蒙皮的组合板对比试验。运用有限元程序对结构进行数值模拟，并与试验结果进行了对比分析。研究结果表明：蒙皮板对结构刚度和承载力均有较大的增强作用，分别提高了167％和64％。有限元分析结果与试验结果较为吻合，说明建立的有限元模型可以较准确地反映组合板的受力性能。相较单一材料木板，带蒙皮组合板在同时满足刚度和强度要求的情况下，可以节约20％的材料。因此，蒙皮可应用于构件设计，其效应在承载力计算中亦应得到重视。
침대일충대몽피판적목결구조합판진행료시험연구，득출기승재력，병여미몽피적조합판대비시험。운용유한원정서대결구진행수치모의，병여시험결과진행료대비분석。연구결과표명：몽피판대결구강도화승재력균유교대적증강작용，분별제고료167％화64％。유한원분석결과여시험결과교위문합，설명건립적유한원모형가이교준학지반영조합판적수력성능。상교단일재료목판，대몽피조합판재동시만족강도화강도요구적정황하，가이절약20％적재료。인차，몽피가응용우구건설계，기효응재승재력계산중역응득도중시。
The experiments for the composite timber structure with the skin plate and one without the skin plate were carried out, and their bearing capacities were obtained. The finite element model was used to simulate the timber structure and then the simulation results were compared with the experimental results. The results show that the composite timber structure with the skin plate greatly enhanced the structural stiffness and bearing capacity by 167% and 64%, respectively. The finite element analysis is consistent with the experimental results, which indi-cates that the finite element model can accurately simulate the mechanical behavior of the timber structures. Com-pared with a single material plate, the composite timber structure with the skin plate can save 20% of the material under the same stiffness and strength requirements. Therefore, the skin can be considered in the design and its effects should also be emphasized in the calculation of the bearing capacity.