锻压装备与制造技术
鍛壓裝備與製造技術
단압장비여제조기술
METALFORMING MACHINERY
2014年
2期
56-58
,共3页
锻造成形%齿轮轴%正交试验%工艺优化
鍛造成形%齒輪軸%正交試驗%工藝優化
단조성형%치륜축%정교시험%공예우화
Gear shaft%Orthogonal experiment%Optimum process parameter
齿轮轴成形属于精密成形过程,其预制坯形状对终锻成形质量有至关重要的影响.本文以影响预制坯成形过程中的4个工艺参数——凸模速度、摩擦因数、预锻凸模拐角斜度、预锻凹模斜度为设计变量,终锻成形载荷与坯料充填情况为目标函数,利用正交试验,选用了4因素3水平进行试验方案设计,利用Deform-3d软件分别模拟分析了各个不同试验方案,得到了最佳工艺参数组合,并通过模拟验证该优化方案的正确性.试验结果对生产实际具有一定指导意义.
齒輪軸成形屬于精密成形過程,其預製坯形狀對終鍛成形質量有至關重要的影響.本文以影響預製坯成形過程中的4箇工藝參數——凸模速度、摩抆因數、預鍛凸模枴角斜度、預鍛凹模斜度為設計變量,終鍛成形載荷與坯料充填情況為目標函數,利用正交試驗,選用瞭4因素3水平進行試驗方案設計,利用Deform-3d軟件分彆模擬分析瞭各箇不同試驗方案,得到瞭最佳工藝參數組閤,併通過模擬驗證該優化方案的正確性.試驗結果對生產實際具有一定指導意義.
치륜축성형속우정밀성형과정,기예제배형상대종단성형질량유지관중요적영향.본문이영향예제배성형과정중적4개공예삼수——철모속도、마찰인수、예단철모괴각사도、예단요모사도위설계변량,종단성형재하여배료충전정황위목표함수,이용정교시험,선용료4인소3수평진행시험방안설계,이용Deform-3d연건분별모의분석료각개불동시험방안,득도료최가공예삼수조합,병통과모의험증해우화방안적정학성.시험결과대생산실제구유일정지도의의.