中国惯性技术学报
中國慣性技術學報
중국관성기술학보
JOURNAL OF CHINESE INERTIAL TECHNOLOGY
2013年
4期
462-466
,共5页
崔鹏程%邹志勤%王翌%乐明金
崔鵬程%鄒誌勤%王翌%樂明金
최붕정%추지근%왕익%악명금
惯导系统%晃动基座%杆臂效应误差%粗对准
慣導繫統%晃動基座%桿臂效應誤差%粗對準
관도계통%황동기좌%간비효응오차%조대준
inertial navigation system%shaking base%lever-arm effect error%coarse alignment
为提高晃动基座下惯导系统的粗对准精度,增强惯导系统对准过程中对环境的适应性,采用了一种基于补偿杆臂效应误差的晃动基座粗对准算法。研究了晃动基座下粗对准原理,推导了晃动基座下粗对准算法中的杆臂速度误差项,最后通过仿真和摇摆试验对在不同扰动条件下杆臂效应误差对粗对准的影响进行了验证。仿真验证和摇摆试验结果表明:在晃动基座下,杆臂效应误差对惯导系统粗对准精度影响显著,特别是在大幅晃动基座上,当补偿杆臂效应误差后,惯导系统粗对准精度可以提高10倍以上,为进一步实现高精度快速精对准奠定了基础。
為提高晃動基座下慣導繫統的粗對準精度,增彊慣導繫統對準過程中對環境的適應性,採用瞭一種基于補償桿臂效應誤差的晃動基座粗對準算法。研究瞭晃動基座下粗對準原理,推導瞭晃動基座下粗對準算法中的桿臂速度誤差項,最後通過倣真和搖襬試驗對在不同擾動條件下桿臂效應誤差對粗對準的影響進行瞭驗證。倣真驗證和搖襬試驗結果錶明:在晃動基座下,桿臂效應誤差對慣導繫統粗對準精度影響顯著,特彆是在大幅晃動基座上,噹補償桿臂效應誤差後,慣導繫統粗對準精度可以提高10倍以上,為進一步實現高精度快速精對準奠定瞭基礎。
위제고황동기좌하관도계통적조대준정도,증강관도계통대준과정중대배경적괄응성,채용료일충기우보상간비효응오차적황동기좌조대준산법。연구료황동기좌하조대준원리,추도료황동기좌하조대준산법중적간비속도오차항,최후통과방진화요파시험대재불동우동조건하간비효응오차대조대준적영향진행료험증。방진험증화요파시험결과표명:재황동기좌하,간비효응오차대관도계통조대준정도영향현저,특별시재대폭황동기좌상,당보상간비효응오차후,관도계통조대준정도가이제고10배이상,위진일보실현고정도쾌속정대준전정료기출。
In order to improve the coarse alignment accuracy of INS on shaking base and enhance the adaptability of environment during alignment of INS, an arithmetic of coarse alignment based on compensating the lever-arm effect error on shaking base was adopted. The principle of coarse alignment on shaking base was studied, and the lever-arm effect error in coarse alignment algorithm was deduced. Finally, the influences of lever-arm effect error on coarse alignment in different shaking conditions were confirmed through simulation and swaying experiments. Simulation and swaying experiments show that the coarse alignment accuracy of INS is significantly affected by lever-arm effect error on shaking base, and the coarse alignment accuracy of INS is improved by more than 10 times after compensating the lever-arm effect error on severe shaking base, laying a foundation for the further realization of high precision and rapid fine alignment.