工业仪表与自动化装置
工業儀錶與自動化裝置
공업의표여자동화장치
INDUSTRIAL INSTRUMENTATION & AUTOMATION
2013年
5期
3-7
,共5页
马呈霞%田强%王晓兰
馬呈霞%田彊%王曉蘭
마정하%전강%왕효란
双馈电机%有功功率波动%直流侧电压控制%变桨控制%平滑
雙饋電機%有功功率波動%直流側電壓控製%變槳控製%平滑
쌍궤전궤%유공공솔파동%직류측전압공제%변장공제%평활
double-fed induction generator%active power fluctuations%DC-link voltage control%variable-pitch control%smooth
提出了一种在超同步转速范围内平滑双馈异步风力发电机( DFIG)转子侧有功功率波动的混合控制策略。该策略在传统的双馈异步风力发电机组控制基础上,引入了变桨距和直流侧电压混合控制。变桨距控制用来平滑有功功率波动的低频分量;直流侧电压控制的给定值叠加一个随功率波动变化的偏差电压,用来平滑有功功率波动的高频分量。在Matlab/Simulink平台上,搭建了DFIG构成的风力发电系统,分别采用传统控制策略和文中提出的混合控制策略进行仿真,结果表明,混合控制策略有效平滑了发电机转子侧有功功率的波动。
提齣瞭一種在超同步轉速範圍內平滑雙饋異步風力髮電機( DFIG)轉子側有功功率波動的混閤控製策略。該策略在傳統的雙饋異步風力髮電機組控製基礎上,引入瞭變槳距和直流側電壓混閤控製。變槳距控製用來平滑有功功率波動的低頻分量;直流側電壓控製的給定值疊加一箇隨功率波動變化的偏差電壓,用來平滑有功功率波動的高頻分量。在Matlab/Simulink平檯上,搭建瞭DFIG構成的風力髮電繫統,分彆採用傳統控製策略和文中提齣的混閤控製策略進行倣真,結果錶明,混閤控製策略有效平滑瞭髮電機轉子側有功功率的波動。
제출료일충재초동보전속범위내평활쌍궤이보풍력발전궤( DFIG)전자측유공공솔파동적혼합공제책략。해책략재전통적쌍궤이보풍력발전궤조공제기출상,인입료변장거화직류측전압혼합공제。변장거공제용래평활유공공솔파동적저빈분량;직류측전압공제적급정치첩가일개수공솔파동변화적편차전압,용래평활유공공솔파동적고빈분량。재Matlab/Simulink평태상,탑건료DFIG구성적풍력발전계통,분별채용전통공제책략화문중제출적혼합공제책략진행방진,결과표명,혼합공제책략유효평활료발전궤전자측유공공솔적파동。
A coordinated control strategy to smooth rotor-side active power of DFIG in the super-syn-chronous speed range is presented in this paper .The coordinated control between variable-pitch control and DC-link voltage control is introduced to conventional strategy .The variable-pitch control is used to smooth the low frequency components of active power fluctuations .The DC-link voltage control is used to smooth the high frequency components of active power fluctuations .The voltage reference is determined by adding a smoothing index coming from high frequency components of output power fluctuations .Simu-lation model of DFIG wind generation system is built in Matlab/Simulink .The results show that the power fluctuations of the generator rotor side are effectively smoothed by the coordinated control strategy .