CAJ | 학술논문

以合成的丙烯酸乳液为基础，与氨基硅油共混制备印花色浆，探索最佳印花工艺。通过各因素的讨论，得出最佳印花工艺为：印花(涂料6％，粘合剂30％，增稠剂PFT 8％，氨基硅油5％，蒸馏水X)→烘干(80℃，3 min)→焙烘(200℃，2.5 min)。通过以上工艺条件对涤棉印花，其干湿摩擦牢度得到了明显的改善。
이합성적병희산유액위기출，여안기규유공혼제비인화색장，탐색최가인화공예。통과각인소적토론，득출최가인화공예위：인화(도료6％，점합제30％，증주제PFT 8％，안기규유5％，증류수X)→홍간(80℃，3 min)→배홍(200℃，2.5 min)。통과이상공예조건대조면인화，기간습마찰뇌도득도료명현적개선。
Based on the synthesis of acrylic latex, the printing paste was prepared mixed with amino-silicone to explore the best printing process. The optimum printing condition is obtained through variety factor investigation as follow: printing (pigment 6%, binder 30%, thickener PFT 8%, amino silicone oil 5%, distilled water X)→drying (80℃,3 min)→baking (200℃,2.5 min). The dry and wet rubbing fastness improved significantly through the above process conditions for polyester cotton blend printing fabric.