工业用水与废水
工業用水與廢水
공업용수여폐수
INDUSTRIAL WATER & WASTEWATER
2014年
1期
50-51
,共2页
工程改造%一体化设备%油田采出水%采出水处理
工程改造%一體化設備%油田採齣水%採齣水處理
공정개조%일체화설비%유전채출수%채출수처리
project reconstruction%integrated equipment%oilfield produced water%produced water treatment
长庆油田小型站场采出水处理工程改造面临着站场位置有限、成本控制严格及安全生产等问题.采用一体化设备对杨米涧集油站采出水处理工程进行改造,结果表明,经处理后采出水中p(油)≤10 mg/L,p(SS)≤15 mg/L,达到长庆油田采出水回注企业标准.该改造方案具有占地小、施工周期短、自动化程度高、运行费低、处理后出水水质好的特点.
長慶油田小型站場採齣水處理工程改造麵臨著站場位置有限、成本控製嚴格及安全生產等問題.採用一體化設備對楊米澗集油站採齣水處理工程進行改造,結果錶明,經處理後採齣水中p(油)≤10 mg/L,p(SS)≤15 mg/L,達到長慶油田採齣水迴註企業標準.該改造方案具有佔地小、施工週期短、自動化程度高、運行費低、處理後齣水水質好的特點.
장경유전소형참장채출수처리공정개조면림착참장위치유한、성본공제엄격급안전생산등문제.채용일체화설비대양미간집유참채출수처리공정진행개조,결과표명,경처리후채출수중p(유)≤10 mg/L,p(SS)≤15 mg/L,체도장경유전채출수회주기업표준.해개조방안구유점지소、시공주기단、자동화정도고、운행비저、처리후출수수질호적특점.