锅炉技术
鍋爐技術
과로기술
BOILER TECHNOLOGY
2014年
3期
11-14,73
,共5页
粗粉分离器%最佳工况%分离特性%数值模拟
粗粉分離器%最佳工況%分離特性%數值模擬
조분분리기%최가공황%분리특성%수치모의
为提高机组运行的稳定性和经济性,将静态粗粉分离器改造成动态粗粉分离器,采用Fluent软件模拟动态粗粉分离器内部气体流场变化和颗粒运动轨迹,研究分析调节动叶轮转速、静叶转角、入口风速对动态粗粉分离器的出粉细度,分离效率,循环倍率,系统阻力等分离特性的影响变化.结果表明:在入口风速17 m/s~19 m/s,动叶轮转速70 r/min,静叶角度45°时,动态粗粉分离器各项运行指标均较理想,动态粗粉分离器处于最佳运行状态,模拟结果能为实际工程应提供了一定理论依据.在现场试验中,动态粗粉分离器各项运行特性也均优于静态粗粉分离器.
為提高機組運行的穩定性和經濟性,將靜態粗粉分離器改造成動態粗粉分離器,採用Fluent軟件模擬動態粗粉分離器內部氣體流場變化和顆粒運動軌跡,研究分析調節動葉輪轉速、靜葉轉角、入口風速對動態粗粉分離器的齣粉細度,分離效率,循環倍率,繫統阻力等分離特性的影響變化.結果錶明:在入口風速17 m/s~19 m/s,動葉輪轉速70 r/min,靜葉角度45°時,動態粗粉分離器各項運行指標均較理想,動態粗粉分離器處于最佳運行狀態,模擬結果能為實際工程應提供瞭一定理論依據.在現場試驗中,動態粗粉分離器各項運行特性也均優于靜態粗粉分離器.
위제고궤조운행적은정성화경제성,장정태조분분리기개조성동태조분분리기,채용Fluent연건모의동태조분분리기내부기체류장변화화과립운동궤적,연구분석조절동협륜전속、정협전각、입구풍속대동태조분분리기적출분세도,분리효솔,순배배솔,계통조력등분리특성적영향변화.결과표명:재입구풍속17 m/s~19 m/s,동협륜전속70 r/min,정협각도45°시,동태조분분리기각항운행지표균교이상,동태조분분리기처우최가운행상태,모의결과능위실제공정응제공료일정이론의거.재현장시험중,동태조분분리기각항운행특성야균우우정태조분분리기.