塑性工程学报
塑性工程學報
소성공정학보
JOURNAL OF PLASTICITY ENGINEERING
2013年
5期
50-55
,共6页
朱亨荣%王志忠%王镇柱%胡成武
硃亨榮%王誌忠%王鎮柱%鬍成武
주형영%왕지충%왕진주%호성무
拉深-翻孔%复合成形%数值模拟%实验
拉深-翻孔%複閤成形%數值模擬%實驗
랍심-번공%복합성형%수치모의%실험
drawing-flanging%compound forming%simulation%experimental study
随着带孔板坯外径和预冲孔径的不同,筒形件的成形方式和变形性质也将有所不同,可能出现简单拉深、拉深-翻孔、翻孔-拉深、简单翻孔等多种复杂情况.为进一步了解坯料形状、尺寸与成形方式之间的关系,掌握其变化规律,实现对复合成形工艺的有效控制,以变形力学为基础对带孔板坯拉深-翻孔复合成形进行理论分析和实验,并采用DYNAFORM软件对不同孔径板料的成形过程进行仿真模拟.结果表明,仿真分析与工艺实验结果吻合.
隨著帶孔闆坯外徑和預遲孔徑的不同,筒形件的成形方式和變形性質也將有所不同,可能齣現簡單拉深、拉深-翻孔、翻孔-拉深、簡單翻孔等多種複雜情況.為進一步瞭解坯料形狀、呎吋與成形方式之間的關繫,掌握其變化規律,實現對複閤成形工藝的有效控製,以變形力學為基礎對帶孔闆坯拉深-翻孔複閤成形進行理論分析和實驗,併採用DYNAFORM軟件對不同孔徑闆料的成形過程進行倣真模擬.結果錶明,倣真分析與工藝實驗結果吻閤.
수착대공판배외경화예충공경적불동,통형건적성형방식화변형성질야장유소불동,가능출현간단랍심、랍심-번공、번공-랍심、간단번공등다충복잡정황.위진일보료해배료형상、척촌여성형방식지간적관계,장악기변화규률,실현대복합성형공예적유효공제,이변형역학위기출대대공판배랍심-번공복합성형진행이론분석화실험,병채용DYNAFORM연건대불동공경판료적성형과정진행방진모의.결과표명,방진분석여공예실험결과문합.