城市建设理论研究(电子版)
城市建設理論研究(電子版)
성시건설이론연구(전자판)
ChengShi Jianshe LiLun Yan Jiu
2014年
16期
52-53
,共2页
地下室%结构设计%荷载取值%抗浮设计
地下室%結構設計%荷載取值%抗浮設計
지하실%결구설계%하재취치%항부설계
basement%structural Design%load value%anti-floating design
目前大部分工程项目都设计有地下室,有些工程的地下室因为设计的不合理造成结构整体上浮、局部底板开裂漏水,或设计过于保守造成成本浪费。本文根据笔者多个地下工程的设计经验,结合现行规范资料就地下室结构设计的荷载作用取值、抗震设计、外墙设计、抗浮设计等方面与各位同行作一些技术性的探讨。
目前大部分工程項目都設計有地下室,有些工程的地下室因為設計的不閤理造成結構整體上浮、跼部底闆開裂漏水,或設計過于保守造成成本浪費。本文根據筆者多箇地下工程的設計經驗,結閤現行規範資料就地下室結構設計的荷載作用取值、抗震設計、外牆設計、抗浮設計等方麵與各位同行作一些技術性的探討。
목전대부분공정항목도설계유지하실,유사공정적지하실인위설계적불합리조성결구정체상부、국부저판개렬루수,혹설계과우보수조성성본낭비。본문근거필자다개지하공정적설계경험,결합현행규범자료취지하실결구설계적하재작용취치、항진설계、외장설계、항부설계등방면여각위동행작일사기술성적탐토。
At present most of the projects are designed with basements, the basement of some project, because of the unreasonable design, float, part of the floor crack leaking, or the cost of conservative design is too waste. According to a number of underground engineering design experience of the author, combined with information on the existing norms and standards, make some summary on basement construction anti-floating design , together with the peers to explore learning.