电工电气
電工電氣
전공전기
ELECTROTECHNICS ELECTRIC
2014年
4期
56-59
,共4页
核电站%低压开关柜%抗震试验
覈電站%低壓開關櫃%抗震試驗
핵전참%저압개관거%항진시험
nuclear power plant%low-voltage switchgear%anti-vibration test
介绍了核电站核岛部分一般技术要求及低压开关柜抗震性能试验要求,给出了试验样品的选择条件,通过在某10 m×10 m 电器抗震试验平台上进行的 MNS 低压抽出式开关柜抗震性能试验验证,结果表明:试验中,试品在额定电压下辅助和控制回路电气连续性良好,试验后,设备和组成部件完整,未出现结构故障,为核电站的安全运行提供了保障。
介紹瞭覈電站覈島部分一般技術要求及低壓開關櫃抗震性能試驗要求,給齣瞭試驗樣品的選擇條件,通過在某10 m×10 m 電器抗震試驗平檯上進行的 MNS 低壓抽齣式開關櫃抗震性能試驗驗證,結果錶明:試驗中,試品在額定電壓下輔助和控製迴路電氣連續性良好,試驗後,設備和組成部件完整,未齣現結構故障,為覈電站的安全運行提供瞭保障。
개소료핵전참핵도부분일반기술요구급저압개관거항진성능시험요구,급출료시험양품적선택조건,통과재모10 m×10 m 전기항진시험평태상진행적 MNS 저압추출식개관거항진성능시험험증,결과표명:시험중,시품재액정전압하보조화공제회로전기련속성량호,시험후,설비화조성부건완정,미출현결구고장,위핵전참적안전운행제공료보장。
Introduction was made to generally technical requirements and low-voltage switchgear anti-vibration test requirements. This paper gave the selection conditions of test samples. The anti-vibration test verification of MNS low-voltage draw-out switchgear was carried out on 10 m×10 m electrical anti-vibration test platform. The results show that under the rated voltage, electrical continuity of auxiliary and control circuit of test samples is fine, after test, equipment and composition parts are complete without structural fault, which provides assurance for nuclear plant safety operation.