遥测遥控
遙測遙控
요측요공
JOURNAL OF TELEMETRY,TRACKING, AND COMMAND
2014年
2期
32-36
,共5页
李菁文%赵一鸣%刘波%李凉海%于勇
李菁文%趙一鳴%劉波%李涼海%于勇
리정문%조일명%류파%리량해%우용
激光雷达%接收系统%准直镜%光学设计
激光雷達%接收繫統%準直鏡%光學設計
격광뢰체%접수계통%준직경%광학설계
Lidar%Receiving system%Collimating lens%Optical design
以大气探测激光雷达系统为背景,介绍系统中准直镜的设计方法.根据设计指标要求,计算满足设计要求的准直镜焦距范围.设计三种不同型式的透射式准直镜,分别计算不同距离处大气回波信号经准直镜准直后的光束发散角及探测器上光斑尺寸.针对大气探测激光雷达探测近距离目标时,不同波长回波光束经准直镜准直后发散情况严重这一特点,采用准直镜离焦的方法.仿真结果表明,方法能够使不同距离处三波长回波信号经准直镜准直后满足光束口径小于等于0.8倍探测器聚焦镜口径,光束发散角小于等于±1°的使用指标要求.
以大氣探測激光雷達繫統為揹景,介紹繫統中準直鏡的設計方法.根據設計指標要求,計算滿足設計要求的準直鏡焦距範圍.設計三種不同型式的透射式準直鏡,分彆計算不同距離處大氣迴波信號經準直鏡準直後的光束髮散角及探測器上光斑呎吋.針對大氣探測激光雷達探測近距離目標時,不同波長迴波光束經準直鏡準直後髮散情況嚴重這一特點,採用準直鏡離焦的方法.倣真結果錶明,方法能夠使不同距離處三波長迴波信號經準直鏡準直後滿足光束口徑小于等于0.8倍探測器聚焦鏡口徑,光束髮散角小于等于±1°的使用指標要求.
이대기탐측격광뢰체계통위배경,개소계통중준직경적설계방법.근거설계지표요구,계산만족설계요구적준직경초거범위.설계삼충불동형식적투사식준직경,분별계산불동거리처대기회파신호경준직경준직후적광속발산각급탐측기상광반척촌.침대대기탐측격광뢰체탐측근거리목표시,불동파장회파광속경준직경준직후발산정황엄중저일특점,채용준직경리초적방법.방진결과표명,방법능구사불동거리처삼파장회파신호경준직경준직후만족광속구경소우등우0.8배탐측기취초경구경,광속발산각소우등우±1°적사용지표요구.