表面技术
錶麵技術
표면기술
SURFACE TECHNOLOGY
2014年
4期
101-105
,共5页
宁智%王元刚%闫帅%吴蒙华%王邦国
寧智%王元剛%閆帥%吳矇華%王邦國
저지%왕원강%염수%오몽화%왕방국
激光重熔%复合电沉积%Fe-ZrO2 复合镀层%显微硬度%表面形貌
激光重鎔%複閤電沉積%Fe-ZrO2 複閤鍍層%顯微硬度%錶麵形貌
격광중용%복합전침적%Fe-ZrO2 복합도층%현미경도%표면형모
laser remelting%composite electrodeposition%Fe-ZrO2 composite coating%micro hardness%surface morphology
目的:进一步提高电沉积 Fe-ZrO2纳米复合镀层的性能。方法在45#钢基体表面电沉积 Fe-ZrO2纳米复合镀层,并进行激光重熔后处理。通过正交实验分析激光重熔参数对镀层显微硬度、结合力和表面形貌的影响,并优化重熔工艺。结果优化的工艺为:电流150 A,脉宽8 ms,频率15 Hz,扫描速率250 mm/ min,负离焦量2 mm。镀层经激光重熔后,硬度提高,纳米颗粒得到了细化,与基体形成了冶金结合。结论激光重熔可以改善 Fe-ZrO2纳米复合镀层的微观形貌,提高其性能。
目的:進一步提高電沉積 Fe-ZrO2納米複閤鍍層的性能。方法在45#鋼基體錶麵電沉積 Fe-ZrO2納米複閤鍍層,併進行激光重鎔後處理。通過正交實驗分析激光重鎔參數對鍍層顯微硬度、結閤力和錶麵形貌的影響,併優化重鎔工藝。結果優化的工藝為:電流150 A,脈寬8 ms,頻率15 Hz,掃描速率250 mm/ min,負離焦量2 mm。鍍層經激光重鎔後,硬度提高,納米顆粒得到瞭細化,與基體形成瞭冶金結閤。結論激光重鎔可以改善 Fe-ZrO2納米複閤鍍層的微觀形貌,提高其性能。
목적:진일보제고전침적 Fe-ZrO2납미복합도층적성능。방법재45#강기체표면전침적 Fe-ZrO2납미복합도층,병진행격광중용후처리。통과정교실험분석격광중용삼수대도층현미경도、결합력화표면형모적영향,병우화중용공예。결과우화적공예위:전류150 A,맥관8 ms,빈솔15 Hz,소묘속솔250 mm/ min,부리초량2 mm。도층경격광중용후,경도제고,납미과립득도료세화,여기체형성료야금결합。결론격광중용가이개선 Fe-ZrO2납미복합도층적미관형모,제고기성능。
Objective To further enhance the properties of Fe-ZrO2 Nanocomposite ceramic coating. Methods The Fe-ZrO2 nanocomposite ceramic coating was prepared on 45 steel surface by electrodeposition and then processed by laser remelting coating. A set of orthogonal experiments were used to analyze the effects of laser remelting parameters on the coating microstructure, hard-ness and binding force and optimize the remelting process. Results The optimized process was drawn as the followings: current 150 A, impulse width 8ms, frequency 15 Hz, scan rate 250 mm/ min, negative defocus amount 2 mm. After the laser remelted, the coating hardness had been improved, nanoparticles had been refined, the metallurgical bond had been formed between the coating and substrate. Conclusion The results show that after the laser remelting, the morphology and properties of Fe-ZrO2 nanocomposite ceramic coating have been improved.