纺织学报
紡織學報
방직학보
JOURNAL OF TEXTILE RESEARCH
2014年
3期
87-91
,共5页
氨基硅油%聚氨酯预聚体%共混乳化%柔软性%亲水性
氨基硅油%聚氨酯預聚體%共混乳化%柔軟性%親水性
안기규유%취안지예취체%공혼유화%유연성%친수성
amino-silicone%polyurethane prepolymer%blending emulsification%softeness%hydrophilicity
利用聚氨酯预聚体(PUP)对氨基硅油进行共混改性制备柔软剂,以改善氨基硅油柔软剂的亲水性.考察了表面活性剂种类、HLB值、乳化温度、pH值、机械搅拌速度、助乳化剂用量等对制得改性氨基硅油乳液稳定性的影响,确定最佳乳化条件:以AEO-3和AEO-9作为复合乳化剂,HLB值为12,乳化温度为20 ℃,pH值为5,搅拌转速为900 r/min,助乳化剂正戊醇用量为被乳化物质量的5%.将乳化得到的聚氨酯预聚体改性氨基硅油(PAS)用于棉织物的柔软整理,通过白度、动摩擦因数、亲水性、手感等测试,考察了其与国内外同类产品应用性能的差异,结果发现:PAS整理织物相对国产氨基硅油柔软剂亲水性大大提高,柔软性相差不大;其综合性能与进口柔软剂2号相当.
利用聚氨酯預聚體(PUP)對氨基硅油進行共混改性製備柔軟劑,以改善氨基硅油柔軟劑的親水性.攷察瞭錶麵活性劑種類、HLB值、乳化溫度、pH值、機械攪拌速度、助乳化劑用量等對製得改性氨基硅油乳液穩定性的影響,確定最佳乳化條件:以AEO-3和AEO-9作為複閤乳化劑,HLB值為12,乳化溫度為20 ℃,pH值為5,攪拌轉速為900 r/min,助乳化劑正戊醇用量為被乳化物質量的5%.將乳化得到的聚氨酯預聚體改性氨基硅油(PAS)用于棉織物的柔軟整理,通過白度、動摩抆因數、親水性、手感等測試,攷察瞭其與國內外同類產品應用性能的差異,結果髮現:PAS整理織物相對國產氨基硅油柔軟劑親水性大大提高,柔軟性相差不大;其綜閤性能與進口柔軟劑2號相噹.
이용취안지예취체(PUP)대안기규유진행공혼개성제비유연제,이개선안기규유유연제적친수성.고찰료표면활성제충류、HLB치、유화온도、pH치、궤계교반속도、조유화제용량등대제득개성안기규유유액은정성적영향,학정최가유화조건:이AEO-3화AEO-9작위복합유화제,HLB치위12,유화온도위20 ℃,pH치위5,교반전속위900 r/min,조유화제정무순용량위피유화물질량적5%.장유화득도적취안지예취체개성안기규유(PAS)용우면직물적유연정리,통과백도、동마찰인수、친수성、수감등측시,고찰료기여국내외동류산품응용성능적차이,결과발현:PAS정리직물상대국산안기규유유연제친수성대대제고,유연성상차불대;기종합성능여진구유연제2호상당.