CAJ | 학술논문

为了检验SF6气体泄漏成像仪的灵敏度，借鉴氦质谱定量检漏仪的检验方法，研制了一套不同漏率的正压漏孔以及可以对漏孔集中供气的供气系统，同时试制了漏孔标定系统用来对标准漏孔的漏率进行标定，并对影响漏孔漏率的因素（温度、压力）进行了试验研究，最后对SF6气体泄漏成像仪（彼岸）进行了初步检测验证。
위료검험SF6기체설루성상의적령민도，차감양질보정량검루의적검험방법，연제료일투불동루솔적정압루공이급가이대루공집중공기적공기계통，동시시제료루공표정계통용래대표준루공적루솔진행표정，병대영향루공루솔적인소（온도、압력）진행료시험연구，최후대SF6기체설루성상의（피안）진행료초보검측험증。
In order to check the sensitivity of the SF 6 gas leakage imager, this paper used the test method of helium mass spectrometry leak detector for reference, and developed a set of pressure leaks with different leakage rates and a gas supply system for the pressure leaks. Besides, a leak calibration system was trial-produced to calibrate the leakage rate of the standard leak, and experimental research was also conducted on the influencing factors (temperature, pressure) on the leakage rate of the leak. Finally, a preliminary verification was conducted on the SF 6 gas leakage imager(FLIR).