军械工程学院学报
軍械工程學院學報
군계공정학원학보
JOURNAL OF ORDNANCE ENGINEERING COLLEGE
2014年
1期
69-73
,共5页
王本力%付洪瑞%刘淑真%史程飞
王本力%付洪瑞%劉淑真%史程飛
왕본력%부홍서%류숙진%사정비
基础油%粘度%调和%Arrhenius模型%Grunberg-Nissan模型
基礎油%粘度%調和%Arrhenius模型%Grunberg-Nissan模型
기출유%점도%조화%Arrhenius모형%Grunberg-Nissan모형
base oil%viscosity%blend%Arrhenius model%Grunberg-Nissan model
采用高低温运动粘度测定仪测量 PAO8(8#聚烯烃)合成基础油和45#变压器油基础油按不同比例调和后混合基础油的粘温性能,运用 Arrhenius模型和 Grunberg-Nissan模型计算混合基础油的理论粘度,研究粘度偏差率随测试温度的变化规律。实验结果表明:Arrhenius模型能准确预测混合基础油的高温运动粘度,粘度偏差率最大值不超过1%,而 Grunberg-Nissan模型能精确计算混合基础油的低温运动粘度;PAO8和45#变压器油基础油调和能够获得高低温粘度的匹配。
採用高低溫運動粘度測定儀測量 PAO8(8#聚烯烴)閤成基礎油和45#變壓器油基礎油按不同比例調和後混閤基礎油的粘溫性能,運用 Arrhenius模型和 Grunberg-Nissan模型計算混閤基礎油的理論粘度,研究粘度偏差率隨測試溫度的變化規律。實驗結果錶明:Arrhenius模型能準確預測混閤基礎油的高溫運動粘度,粘度偏差率最大值不超過1%,而 Grunberg-Nissan模型能精確計算混閤基礎油的低溫運動粘度;PAO8和45#變壓器油基礎油調和能夠穫得高低溫粘度的匹配。
채용고저온운동점도측정의측량 PAO8(8#취희경)합성기출유화45#변압기유기출유안불동비례조화후혼합기출유적점온성능,운용 Arrhenius모형화 Grunberg-Nissan모형계산혼합기출유적이론점도,연구점도편차솔수측시온도적변화규률。실험결과표명:Arrhenius모형능준학예측혼합기출유적고온운동점도,점도편차솔최대치불초과1%,이 Grunberg-Nissan모형능정학계산혼합기출유적저온운동점도;PAO8화45#변압기유기출유조화능구획득고저온점도적필배。
The viscosity-temperature performance of the blen d oils is investigated by measuring the kinematic viscosity of PAO8 (No.8 polyαolefin)synthetic base oil,base oil for No.45 transform-er oil and their blend oils with different blending ratio in the temperature range from 100 ℃ to-30 ℃.The theoretical kinematic viscosity is calculated using Arrhenius model and Grunberg-Nissan model.And the law of viscosity deviation ratio vs.temperature is studied.The experimen-tal results show that the high temperature viscosity can be well predicted by the Arrhenius mod-el.The maximum viscosity deviation ratio is less than 1%.The model put forward by Grunberg and Nissan is more suitable for the calculation of the low temperature viscosity.The blend of PAO8 and base oil for No.45 transformer oil can achieve the high-low temperature viscosity.