火炮发射与控制学报
火砲髮射與控製學報
화포발사여공제학보
GUNLAUNCH & CONTROL JOURNAL
2014年
1期
56-60
,共5页
张金忠%苏忠亭%徐达%赵富全
張金忠%囌忠亭%徐達%趙富全
장금충%소충정%서체%조부전
步兵战车%自动炮武器系统%发射动力学%仿真
步兵戰車%自動砲武器繫統%髮射動力學%倣真
보병전차%자동포무기계통%발사동역학%방진
infantry combat vehicle%automatic gun weapon system%firing dynamics%simulation
为提高自动炮武器系统发射动力学模型精度,基于实弹射击试验建立支持向量机响应面,对仿真模型进行了修正。应用有限元分析方法建立了双炮身管结构和炮塔结构有限元模型,基于武器系统各部件间的约束关系建立了步兵战车刚柔耦合发射动力学模型;基于相同边界条件,选取自动炮连发射击中典型结构的振动特性搭建了测试系统并进行了实弹射击试验;针对仿真数据与试验数据误差,引入支持向量机响应面方法对步兵战车刚柔耦合发射动力学模型进行了修正。修正结果表明,基于支持向量机响应面的模型修正方法大幅提高了自动炮武器系统发射动力学模型的精度,更准确地反映了自动炮射击过程中的机构动态特性。
為提高自動砲武器繫統髮射動力學模型精度,基于實彈射擊試驗建立支持嚮量機響應麵,對倣真模型進行瞭脩正。應用有限元分析方法建立瞭雙砲身管結構和砲塔結構有限元模型,基于武器繫統各部件間的約束關繫建立瞭步兵戰車剛柔耦閤髮射動力學模型;基于相同邊界條件,選取自動砲連髮射擊中典型結構的振動特性搭建瞭測試繫統併進行瞭實彈射擊試驗;針對倣真數據與試驗數據誤差,引入支持嚮量機響應麵方法對步兵戰車剛柔耦閤髮射動力學模型進行瞭脩正。脩正結果錶明,基于支持嚮量機響應麵的模型脩正方法大幅提高瞭自動砲武器繫統髮射動力學模型的精度,更準確地反映瞭自動砲射擊過程中的機構動態特性。
위제고자동포무기계통발사동역학모형정도,기우실탄사격시험건립지지향량궤향응면,대방진모형진행료수정。응용유한원분석방법건립료쌍포신관결구화포탑결구유한원모형,기우무기계통각부건간적약속관계건립료보병전차강유우합발사동역학모형;기우상동변계조건,선취자동포련발사격중전형결구적진동특성탑건료측시계통병진행료실탄사격시험;침대방진수거여시험수거오차,인입지지향량궤향응면방법대보병전차강유우합발사동역학모형진행료수정。수정결과표명,기우지지향량궤향응면적모형수정방법대폭제고료자동포무기계통발사동역학모형적정도,경준학지반영료자동포사격과정중적궤구동태특성。
The automatic gun firing dynamics model was built up and the simulation model was updated by use of the support vector machine response surface method based on the actual firing experiment so as to analyze the influence factor of firing precision.The finite element models of the gun barrel structure and turret structure were established by means of finite element analysis method,and the rigid-flexible cou-pled firing dynamics models of the infantry combat vehicle were set up based on the restricted relationship between components and joints of the weapon system.The test system was established and the actual fir-ing experiment was carried out by use of picking up the typical structure vibration characteristics in the burst firing of automatic gun based on the same boundary conditions.Aimed at the errors between the simula-tion data and the test data,the automatic gun firing dynamics model was updated.The updating results showed that the model updating method can increase the precision of firing dynamic model and more accurately reflect the framework dynamic characteristics of infantry combat vehicle automatic gun during the course of firing.