冶金动力
冶金動力
야금동력
METALLURGICAL POWER
2014年
4期
61-65
,共5页
钢包加盖%虚拟样机%有限元分析%温度场%仿真
鋼包加蓋%虛擬樣機%有限元分析%溫度場%倣真
강포가개%허의양궤%유한원분석%온도장%방진
ladle covering%virtual prototype%finite element analysis%temperature field%emulation
基于ADAMS建立了钢包加盖的模型,对钢包取盖过程进行了动力学仿真分析,验证插齿式揭盖机构的可行性,并根据仿真结果对其结构重新设计改进。利用有限元法建立了钢包的热力学模型,分析了钢包稳态温度场的分布,并将稳态温度场作为初始条件加载到模型中进行钢包加盖的瞬态热分析,获得了钢包的温度变化曲线。仿真结果表明钢包加盖后可以使钢包节能约115×105kJ,可见对钢包蓄热能力影响显著。
基于ADAMS建立瞭鋼包加蓋的模型,對鋼包取蓋過程進行瞭動力學倣真分析,驗證插齒式揭蓋機構的可行性,併根據倣真結果對其結構重新設計改進。利用有限元法建立瞭鋼包的熱力學模型,分析瞭鋼包穩態溫度場的分佈,併將穩態溫度場作為初始條件加載到模型中進行鋼包加蓋的瞬態熱分析,穫得瞭鋼包的溫度變化麯線。倣真結果錶明鋼包加蓋後可以使鋼包節能約115×105kJ,可見對鋼包蓄熱能力影響顯著。
기우ADAMS건립료강포가개적모형,대강포취개과정진행료동역학방진분석,험증삽치식게개궤구적가행성,병근거방진결과대기결구중신설계개진。이용유한원법건립료강포적열역학모형,분석료강포은태온도장적분포,병장은태온도장작위초시조건가재도모형중진행강포가개적순태열분석,획득료강포적온도변화곡선。방진결과표명강포가개후가이사강포절능약115×105kJ,가견대강포축열능력영향현저。
A model for ladle covering was established based on ADAMS, to dynamically emulate ladle covering process, validate the feasibility of gear-shaping cover remover and re-design the structure of the remover according to the results of the emulation. A thermal mod-el for ladle was set up using finite element method, the distribution of stable temperature field of ladle was analyzed and the stable temperature field was also loaded into the model as initial conditions to perform transient thermal analysis, obtaining temperature time history. Emulation results showed that covered ladle could save energy by about 115í105kJ, indicating significant effect on heat preservation of ladle.