冶金动力
冶金動力
야금동력
METALLURGICAL POWER
2014年
4期
42-43,45
,共3页
烧结冷却机%低温废气%余热回收%换热器
燒結冷卻機%低溫廢氣%餘熱迴收%換熱器
소결냉각궤%저온폐기%여열회수%환열기
sintering cooler%low temperature waste gas%waste heat recovery%heat exchang
以某公司180 m2烧结机的冷却机低温废气余热回收利用为对象，结合现场状况，制定了回收余热生产热水的技术路线和工艺流程，探讨了主体设备---换热器的受热面布置方案。
以某公司180 m2燒結機的冷卻機低溫廢氣餘熱迴收利用為對象，結閤現場狀況，製定瞭迴收餘熱生產熱水的技術路線和工藝流程，探討瞭主體設備---換熱器的受熱麵佈置方案。
이모공사180 m2소결궤적냉각궤저온폐기여열회수이용위대상，결합현장상황，제정료회수여열생산열수적기술로선화공예류정，탐토료주체설비---환열기적수열면포치방안。
To recover the residual heat from the low temperature waste gas of the cooler for the 180 m2 sinter at a plant, the technical route and process flow for hot water produc-tion with recovered waste heat were drawn up and the heating surface arrangement of the major equipment of heat exchanger was discussed based on actual site conditions.
