价值工程
價值工程
개치공정
VALUE ENGINEERING
2014年
9期
74-74,75
,共2页
桥梁%移动模架%线形控制%预应力
橋樑%移動模架%線形控製%預應力
교량%이동모가%선형공제%예응력
bridge%Movable Support System%alignment control%prestress
移动模架的施工方法主要采用逐跨现浇的施工工艺,但是在整联箱梁还没有全部施工完毕之前存在多次受力结构的转换。但是逐跨施加预应力后,除了悬臂端会产生负弯矩向上翘曲之外,还会受到混凝土收缩和徐变的影响,因此,在整个施工控制的过程中,控制箱梁的线形成为最关键的问题之一。
移動模架的施工方法主要採用逐跨現澆的施工工藝,但是在整聯箱樑還沒有全部施工完畢之前存在多次受力結構的轉換。但是逐跨施加預應力後,除瞭懸臂耑會產生負彎矩嚮上翹麯之外,還會受到混凝土收縮和徐變的影響,因此,在整箇施工控製的過程中,控製箱樑的線形成為最關鍵的問題之一。
이동모가적시공방법주요채용축과현요적시공공예,단시재정련상량환몰유전부시공완필지전존재다차수력결구적전환。단시축과시가예응력후,제료현비단회산생부만구향상교곡지외,환회수도혼응토수축화서변적영향,인차,재정개시공공제적과정중,공제상량적선형성위최관건적문제지일。
The construction method of MSS is mainly used by construction technology span cast-in-place, but in the entire United box girder has not completed all construction before the existence of multiple transfer the stress structure. But by span prestressed concrete, in addition to cantilever will produce negative bending upward warping, is also affected by the shrinkage and creep of concrete, therefore, in the whole process of construction control, one of the key problems in current as control box girder.