实验流体力学
實驗流體力學
실험류체역학
JOURNAL OF EXPERIMENTS IN FLUID MECHANICS
2014年
2期
45-50,58
,共7页
马昌友%侯敏杰%凌代军%幸晓龙
馬昌友%侯敏傑%凌代軍%倖曉龍
마창우%후민걸%릉대군%행효룡
平面叶栅%PIV测量%尾迹探针%暂冲式风洞
平麵葉柵%PIV測量%尾跡探針%暫遲式風洞
평면협책%PIV측량%미적탐침%잠충식풍동
plane cascade%PIV measurement%wake probe%intermittent wind tunnel
针对PIV技术在暂冲式高亚声速平面叶栅流场中遇到的示踪粒子投放问题,通过采用高压雾化式粒子发生器以及安装在稳定段前的撒播器,有效地使示踪粒子均匀地与主流混合,并成功开展了某扩压平面叶栅叶片槽道及出口尾迹可视化测量,获得了零迎角、进口马赫数0.2~0.8状态下的二维速度矢量场。为了验证PIV在叶栅流场测试结果的可靠性,在相同工况下,将PIV测量结果分别与数值计算结果和三孔尾迹探针测量结果进行了对比分析。结果表明:采用PIV技术测得的叶栅中截面二维速度矢量场合理地反映了叶片槽道及尾迹的流动结构,与数值模拟结果较为接近;PIV与三孔楔形尾迹探针在叶栅出口尾迹的测量所获得的气流速度和主流区的出口气流角重合性较好;尾迹分离区的出口气流角重合性略差,主要原因是尾迹区气流角超出了探针校准范围,这也说明了PIV测试技术优势。本文提出的PIV测量技术也可用于连续式叶栅风洞中。
針對PIV技術在暫遲式高亞聲速平麵葉柵流場中遇到的示蹤粒子投放問題,通過採用高壓霧化式粒子髮生器以及安裝在穩定段前的撒播器,有效地使示蹤粒子均勻地與主流混閤,併成功開展瞭某擴壓平麵葉柵葉片槽道及齣口尾跡可視化測量,穫得瞭零迎角、進口馬赫數0.2~0.8狀態下的二維速度矢量場。為瞭驗證PIV在葉柵流場測試結果的可靠性,在相同工況下,將PIV測量結果分彆與數值計算結果和三孔尾跡探針測量結果進行瞭對比分析。結果錶明:採用PIV技術測得的葉柵中截麵二維速度矢量場閤理地反映瞭葉片槽道及尾跡的流動結構,與數值模擬結果較為接近;PIV與三孔楔形尾跡探針在葉柵齣口尾跡的測量所穫得的氣流速度和主流區的齣口氣流角重閤性較好;尾跡分離區的齣口氣流角重閤性略差,主要原因是尾跡區氣流角超齣瞭探針校準範圍,這也說明瞭PIV測試技術優勢。本文提齣的PIV測量技術也可用于連續式葉柵風洞中。
침대PIV기술재잠충식고아성속평면협책류장중우도적시종입자투방문제,통과채용고압무화식입자발생기이급안장재은정단전적살파기,유효지사시종입자균균지여주류혼합,병성공개전료모확압평면협책협편조도급출구미적가시화측량,획득료령영각、진구마혁수0.2~0.8상태하적이유속도시량장。위료험증PIV재협책류장측시결과적가고성,재상동공황하,장PIV측량결과분별여수치계산결과화삼공미적탐침측량결과진행료대비분석。결과표명:채용PIV기술측득적협책중절면이유속도시량장합리지반영료협편조도급미적적류동결구,여수치모의결과교위접근;PIV여삼공설형미적탐침재협책출구미적적측량소획득적기류속도화주류구적출구기류각중합성교호;미적분리구적출구기류각중합성략차,주요원인시미적구기류각초출료탐침교준범위,저야설명료PIV측시기술우세。본문제출적PIV측량기술야가용우련속식협책풍동중。
The tracer particles selecting and sowing was very important in PIV technology ap-plied to blow-down and high subsonic plane cascade flow field measurement.In this paper,tracer partides flow was effectively mixed with the main flow by using high pressure atomized particle generator and broadcaster installed in front of the steady pressure section,and we successfully obtained 2-D velocity fields of a compressor cascade channel and wake at zero incidence angle and inlet Mach number from 0 .2 to 0 .8 .In order to validate reliability of PIV results in the cascade flow field,the PIV results were compared with the results of the numerical simulation and three hole wake probe in the same aerodynamic conditions.The results indicated that 2-D velocity vec-tor field acquired by the PIV was closer to the numerical simulation results,and reasonably re-flected the flow structure of the blade passage;the PIV data got good agreement with the three hole wake probe data in the aspect of the velocity magnitude and flow angle at mainstream area of the cascade outlet.But the coincidence of flow angle at wake separation area was slightly bad. The main reason was that the flow angle in this area was beyond the scope of probe calibration. In addition,in order to obtain accurate PIV measuring results,it was very important to avoid contamination of the tracer particles to the window during the measurement.PIV measurement technique proposed in this paper could also be used for continuous cascade wind tunnel.