铜业工程
銅業工程
동업공정
COPPER ENGINEERING
2014年
1期
4-6,45
,共4页
上引法%无氧铜杆%硫%断线%原因分析
上引法%無氧銅桿%硫%斷線%原因分析
상인법%무양동간%류%단선%원인분석
以上引无氧铜杆铸造过程为研究对象,探索硫含量对无氧铜杆质量的影响规律.经研究表明,含硫量超过0.0015%的阴极铜原料生产的无氧铜杆,会导致铜杆在后续拉拔加工过程中出现明显的材质脆断现象.通过分析硫对无氧铜杆质量的影响,找到了以工艺改进有效降低无氧铜杆中硫含量的方法,减轻了硫对无氧铜杆质量的不良影响,从而实现有效控制加工断线率,保证铜细线生产成材率.
以上引無氧銅桿鑄造過程為研究對象,探索硫含量對無氧銅桿質量的影響規律.經研究錶明,含硫量超過0.0015%的陰極銅原料生產的無氧銅桿,會導緻銅桿在後續拉拔加工過程中齣現明顯的材質脆斷現象.通過分析硫對無氧銅桿質量的影響,找到瞭以工藝改進有效降低無氧銅桿中硫含量的方法,減輕瞭硫對無氧銅桿質量的不良影響,從而實現有效控製加工斷線率,保證銅細線生產成材率.
이상인무양동간주조과정위연구대상,탐색류함량대무양동간질량적영향규률.경연구표명,함류량초과0.0015%적음겁동원료생산적무양동간,회도치동간재후속랍발가공과정중출현명현적재질취단현상.통과분석류대무양동간질량적영향,조도료이공예개진유효강저무양동간중류함량적방법,감경료류대무양동간질량적불량영향,종이실현유효공제가공단선솔,보증동세선생산성재솔.