CAJ | 학술논문

根据步进送料机的设计要求，利用 SolidWorks 软件建立送料机的三维模型，用以验证设计方案的正确性，本方案采用双直线四杆机构实现步进送料动作。在后续设计中还会用到 ADAMS软件对模型进行力学仿真分析，因为ADAMS软件的建模功能不如SolidWorks软件强大，故可先用SolidWorks软件建立三维模型，再导入 ADAMS 软件中进行仿真分析。SolidWorks 软件的应用大大缩短了设计周期，节约了设计成本，在现代设计中占有举足轻重的地位。
근거보진송료궤적설계요구，이용 SolidWorks 연건건립송료궤적삼유모형，용이험증설계방안적정학성，본방안채용쌍직선사간궤구실현보진송료동작。재후속설계중환회용도 ADAMS연건대모형진행역학방진분석，인위ADAMS연건적건모공능불여SolidWorks연건강대，고가선용SolidWorks연건건립삼유모형，재도입 ADAMS 연건중진행방진분석。SolidWorks 연건적응용대대축단료설계주기，절약료설계성본，재현대설계중점유거족경중적지위。
According to the design requirement of step feeding machine,SolidWorks was used to set up a three-dimen-sional model of feeder with the aim of proving the validity of the design scheme.And in this scheme,the four pole double straight line mechanism was utilized to achieve the feeding.Because the soft ADAMS is not as good as SolidWorks in the modeling way,and it will be still used in the dynamic simulation analysis and in the subsequent design,the three-dimension-al model can be imported into ADAMS to analyze after modeling in SolidWorks.Using SolidWorks can greatly shorten the design cycle and save the design cost,which plays a decisive role in modern design.