光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2014年
5期
52-56
,共5页
范生宏%刘昌儒%亓晓彤%曹冬雨%张丽华%吴亚军%王孟
範生宏%劉昌儒%亓曉彤%曹鼕雨%張麗華%吳亞軍%王孟
범생굉%류창유%기효동%조동우%장려화%오아군%왕맹
结构光%微小变形%标定%精度分析%验证
結構光%微小變形%標定%精度分析%驗證
결구광%미소변형%표정%정도분석%험증
structure light%small deformation%calibration%accuracy analysis%verification
文中建立了结构光测量系统数学模型,并分析了结构光测量精度的影响因素。同时在结构光光条图像处理中改进了原有方法,使用了一种新的快速光条中心提取算法。文章通过设计标准板进行了精度检测实验,分析了系统对标准宽度和深度的测量精度。实验结果表明,该测量方法对深度的检测精度优于0.2 mm,对宽度的检测精度优于0.3 mm,可以满足亚毫米级微小变形检测的精度要求,是一种有效的微小变形检测和三维测量方法。
文中建立瞭結構光測量繫統數學模型,併分析瞭結構光測量精度的影響因素。同時在結構光光條圖像處理中改進瞭原有方法,使用瞭一種新的快速光條中心提取算法。文章通過設計標準闆進行瞭精度檢測實驗,分析瞭繫統對標準寬度和深度的測量精度。實驗結果錶明,該測量方法對深度的檢測精度優于0.2 mm,對寬度的檢測精度優于0.3 mm,可以滿足亞毫米級微小變形檢測的精度要求,是一種有效的微小變形檢測和三維測量方法。
문중건립료결구광측량계통수학모형,병분석료결구광측량정도적영향인소。동시재결구광광조도상처리중개진료원유방법,사용료일충신적쾌속광조중심제취산법。문장통과설계표준판진행료정도검측실험,분석료계통대표준관도화심도적측량정도。실험결과표명,해측량방법대심도적검측정도우우0.2 mm,대관도적검측정도우우0.3 mm,가이만족아호미급미소변형검측적정도요구,시일충유효적미소변형검측화삼유측량방법。
The mathematical model of structure light measurement system is established, and the factors influencing the measurement accuracy are analyzed. At the same time, a fast new light strip center edge extraction algorithm is used in the image processing method, which improves the extraction accuracy distinctly. The accuracy testing experiments are designed and analyzed by standard plate. The experimental results show that the measurement accuracy of this method is better than that of 0.2mm and 0.3mm, and reached in the detection depth and width on the regular groove, which can fully meet the requirements of sub-millimeter small deformation detection accuracy. It is an effective detection method.