功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
z1期
28-31
,共4页
安玉良%李杰%袁霞%隋宏超
安玉良%李傑%袁霞%隋宏超
안옥량%리걸%원하%수굉초
吸波材料%溶胶-凝胶法%镍锌铁氧体%活性炭
吸波材料%溶膠-凝膠法%鎳鋅鐵氧體%活性炭
흡파재료%용효-응효법%얼자철양체%활성탄
absorbing-wave materials%sol-gel%Ni-Zn ferrite%activated carbon
以柠檬酸为络合剂制备镍锌铁氧体溶胶,以活性炭为基体负载 Ni-Zn 铁氧体,再通过焙烧制备出形态和结构理想的活性炭/镍锌铁氧体复合材料;详细地考察烧结温度、煅烧气氛及活性炭与铁氧体的配比等工艺参数对复合材料的形态和结构的影响;分别采用X射线衍射(XRD)和扫描电镜(SEM)对制备出的复合材料进行形貌、结构表征分析.采用波导法在8.2~12.4 GHz波段对活性炭负载纳米镍锌铁氧体复合材料进行电磁参数测试,结果表明所制备活性炭负载镍锌铁氧体复合材料具有较高的电、磁损耗角正切值,其吸波性能较好.
以檸檬痠為絡閤劑製備鎳鋅鐵氧體溶膠,以活性炭為基體負載 Ni-Zn 鐵氧體,再通過焙燒製備齣形態和結構理想的活性炭/鎳鋅鐵氧體複閤材料;詳細地攷察燒結溫度、煅燒氣氛及活性炭與鐵氧體的配比等工藝參數對複閤材料的形態和結構的影響;分彆採用X射線衍射(XRD)和掃描電鏡(SEM)對製備齣的複閤材料進行形貌、結構錶徵分析.採用波導法在8.2~12.4 GHz波段對活性炭負載納米鎳鋅鐵氧體複閤材料進行電磁參數測試,結果錶明所製備活性炭負載鎳鋅鐵氧體複閤材料具有較高的電、磁損耗角正切值,其吸波性能較好.
이저몽산위락합제제비얼자철양체용효,이활성탄위기체부재 Ni-Zn 철양체,재통과배소제비출형태화결구이상적활성탄/얼자철양체복합재료;상세지고찰소결온도、단소기분급활성탄여철양체적배비등공예삼수대복합재료적형태화결구적영향;분별채용X사선연사(XRD)화소묘전경(SEM)대제비출적복합재료진행형모、결구표정분석.채용파도법재8.2~12.4 GHz파단대활성탄부재납미얼자철양체복합재료진행전자삼수측시,결과표명소제비활성탄부재얼자철양체복합재료구유교고적전、자손모각정절치,기흡파성능교호.
The Ni-Zn ferrite sol was synthesized with citric acid as complexing reagent,and the ferrite and activa-ted carbon composite gel was obtained by vaporization treatment,then the activated carbon loaded with Ni-Zn ferrite composite was prepared by calcination treatment of the gel.The effect of process parameters such as the sintering temperature,sintering gas and ratio of carbon/ferrite on the morphology and structure of composite were studied in detail,in which the morphology,structure and compose of composite were characterized by scanning electron microscopy (SEM)and elements X-ray diffraction (XRD).Furthermore,the complex permit-tivity and permeability of the as-prepared composites were characterized in the frequency ranges of 8.2-12.4 GHz by the wave-guide method on the vector network analyzer,in which the higher electrical and magnetic loss tan-gent values of the activated carbon loaded with Ni-Zn ferrite composite were obtained.